4bangerJP.com
May 23, 2012, 03:59:38 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 4BangerJP.com Stickers Now Available!
 
   Home   Help Login Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: Dana 30 inner seal with TJ axle  (Read 999 times)
0 Members and 2 Guests are viewing this topic.
sharpxmen
Chief Squirrel BlowerŪ
Member
*

Karma: +26/-0
Offline Offline

Posts: 5429


« Reply #15 on: September 08, 2010, 12:39:18 PM »

and i was probably wrong - i looked at an exploded view of YJ D30 and there is no inner seal so i'm lost.

this is annoying, i found a writeup that also mentions 2 seals on the pass side  rant and the manual is fairly vague when it comes to the seal replacement on the diff housing.

EDIT: this is a good writeup, also has some P/Ns for the seals (and seems that like it's been said some have 1 seal and some have 2) http://www.stu-offroad.com/axle/yjd30convert/yjconvert-1.htm

Quote
[...]
The Warn part numbers are:
Inner seal - 37897
Outer seal - 60006
Block off plate - 39147

Note from Stu:  I pulled these part numbers off of a reliable forum, however, I've not verified them:
Inner seal - Chicago Rawhide CR11343
Outer seal - Spicer 46470
[...]
Update:  02/02/2007

Here are some part numbers to the seal that fits in the passenger side of the axle tube right at the differential. Please bear in mind that I used the seal that Warn sent and haven't ordered a seal using these numbers. They were kindly provided to me by other guys who have emailed me after they did the axle shaft swap.

Chicago Rawhide Part No: CR-11343
National Part No: 471763
Quadratec Part No: 52420.12

« Last Edit: September 08, 2010, 12:47:48 PM by sharpxmen » Logged
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SMF Theme © Gaia
Valid XHTML 1.0! Valid CSS!