4bangerjp.com

General Forums => The Mess Hall => Topic started by: brokenwrist21 on January 13, 2012, 01:51:23 AM

Title: efan control
Post by: brokenwrist21 on January 13, 2012, 01:51:23 AM

hey yall i just got my taurus 3.8 fan and now i need to get the controller for it. i know this has been covered about a thousand different times. who uses what controller, the only time the temp will get high enough for the fan to run, is during parades, while wheeling, sitting in traffic, driving through town, etc. i would like to have the ability to run it manually if need be

Title: Re: efan control
Post by: Mozman68 on January 13, 2012, 03:03:01 AM

Here's mine.

http://4bangerjp.com/forums/index.php/topic,2750.225.html

Title: Re: efan control
Post by: Jeffy on January 13, 2012, 11:58:27 AM

Cheap but works great.

http://4bangerjp.com/forums/index.php/topic,3781.0.html

Title: Re: efan control
Post by: sharpxmen on January 13, 2012, 01:46:25 PM

my install
http://4bangerjp.com/forums/index.php/topic,10360.0.html

Hayden adjustable controller can be had for about $30 on Amazon, i used a threaded probe but the exact same controller is available with a "thru fins" probe as well. "Always Off" can be controlled by the "ignition on" wire at the controller, "Always On" can be controlled by the A/C compressor on wire at the controller as well so you can add an On/Off/On DPDT switch to control these 3 states (auto, always on, always off) - i am planning to do that but not completed yet.

Title: Re: efan control
Post by: brokenwrist21 on January 15, 2012, 11:48:48 PM

thanks guys, i think i'm wire mine like jeffy did. it looks the simplest.