4bangerjp.com

General Forums => The Mess Hall => Topic started by: AWK on March 30, 2015, 07:00:55 AM

Title: Idled Air Control Housing Gasket #?
Post by: AWK on March 30, 2015, 07:00:55 AM

Anyone know the part number for the gasket between the IAC housing and the Throttle body?   My local parts store doesn't have it and only has the base (Manifold) gasket.   I am doing the 2.4 to 4.0 conversion.

Thank you,

AWK

Title: Re: Idled Air Control Housing Gasket #?
Post by: sharpxmen on March 30, 2015, 08:38:39 AM

use very thin film of RTV

Title: Re: Idled Air Control Housing Gasket #?
Post by: AWK on March 30, 2015, 04:22:58 PM

Jeep dealer doesn't show or list the part.  Couldn't find it at Napa or o'riellys.  Rtv it is.
Thanks
AWK

Title: Re: Idled Air Control Housing Gasket #?
Post by: AWK on April 02, 2015, 09:41:31 AM

Worked just fine.  TB is in and TJ is puring like a kitten (with a Check engine Lite)   But I already had that!  I will fix it this weekend with a new converter and a O2 sensor.    :clap:

Title: Re: Idled Air Control Housing Gasket #?
Post by: sharpxmen on April 03, 2015, 01:59:35 AM

cool  :thumb:

Title: Re: Idled Air Control Housing Gasket #?
Post by: AWK on April 06, 2015, 12:18:57 PM

Dropped the transfer skid plate , changed all 6 cinch nuts then dropped it 1 inch.  Got rid of most of the vibration.  While I was there I installed a new cross over pipe with two new O2 sensors.  Chech engine light is gone.  Someone before me had gutted the converter.   New converter makes the exhaust sound much better.   

AWK