4bangerjp.com

General Forums => The Mess Hall => Topic started by: Krod on October 13, 2006, 11:08:22 PM

Title: Need a Jeep/Mopar Part #
Post by: Krod on October 13, 2006, 11:08:22 PM

Hey guys.  My 94 just ate its first set of motor mounts.  SO I need to replace 'em asap.  It also sheared the spacer bracket on the passenger side (under the motor mount).  Can anyone give me a part number for that piece so I can order it from the dealership?  


Also....any advice for some stronger motor mounts that AREN'T soild bushings?

Title: Need a Jeep/Mopar Part #
Post by: Greatwhite on October 13, 2006, 11:22:36 PM

Parts guys at the dealership can get you the correct parts for your application if you give them your VIN, typically the last 8 but sometimes the whole thing. And im sure that somone here knows what they are as well, but i dont so hope that helps heh :D

Title: Need a Jeep/Mopar Part #
Post by: Jeffy on October 13, 2006, 11:29:35 PM

You don't need a VIN.  Just go to the Dealer and they have it on their computer.  They should have them.  IF you get it though, could you give me the Parts number?   :lol:   They'll probably have to special order them though.  I got mine years ago and never got the part number.  BTW: the replacement is a lot stronger then the original.

I recommend getting stock moutns from http://www.willysoffroadsupply.com/.  Tell Rob I sent ya.  He's got the best prices for the mounts.  You'll get both engine mounts and the tranny mount for around $35.  This is a lot cheaper then NAPA or anyone else.

Title: Need a Jeep/Mopar Part #
Post by: Krod on October 14, 2006, 09:55:29 AM

:thumb:

Title: Need a Jeep/Mopar Part #
Post by: Krod on October 20, 2006, 10:46:11 AM

Ok guys got the part from the dealer.  $15 bucks (not too bad!   8)  )  It IS a dealer only part, so dont waste your time hunting all over for it.  The new bracket looks MUCH stronger than the original.  

DC part number on the package...

Daimler Chrysler
52058562 - Bracket, Pass Side Motor mount 2.5L

Title: Need a Jeep/Mopar Part #
Post by: Jeffy on October 20, 2006, 12:18:35 PM

Quote from: "Krod"

Ok guys got the part from the dealer.  $15 bucks (not too bad!   8)  )  It IS a dealer only part, so dont waste your time hunting all over for it.  The new bracket looks MUCH stronger than the original.  

DC part number on the package...

Daimler Chrysler
52058562 - Bracket, Pass Side Motor mount 2.5L

Cool I added it to the FAQ.

Title: Need a Jeep/Mopar Part #
Post by: Jeffy on October 20, 2006, 12:18:58 PM

Quote from: "Krod"

Ok guys got the part from the dealer.  $15 bucks (not too bad!   8)  )  It IS a dealer only part, so dont waste your time hunting all over for it.  The new bracket looks MUCH stronger than the original.  

DC part number on the package...

Daimler Chrysler
52058562 - Bracket, Pass Side Motor mount 2.5L

Cool I added it to the FAQ.

Title: Need a Jeep/Mopar Part #
Post by: jagular7 on October 22, 2006, 04:37:48 PM

Quote from: "Krod"

Ok guys got the part from the dealer.  $15 bucks (not too bad!   8)  )  It IS a dealer only part, so dont waste your time hunting all over for it.  The new bracket looks MUCH stronger than the original.  

DC part number on the package...

Daimler Chrysler
52058562 - Bracket, Pass Side Motor mount 2.5L

Got a pic before install and next to old for comparison?

Title: Need a Jeep/Mopar Part #
Post by: Krod on October 22, 2006, 05:00:29 PM

From Jeffy....
(http://i4.photobucket.com/albums/y118/yokomura/4BangerJP/engine_mounts/top_broken.jpg)

(http://i4.photobucket.com/albums/y118/yokomura/4BangerJP/engine_mounts/broken.jpg)

But mine looked identical.

Title: Need a Jeep/Mopar Part #
Post by: Jeffy on October 22, 2006, 06:08:56 PM

Quote from: "jagular7"

Quote from: "Krod"

Ok guys got the part from the dealer.  $15 bucks (not too bad!   8)  )  It IS a dealer only part, so dont waste your time hunting all over for it.  The new bracket looks MUCH stronger than the original.  

DC part number on the package...

Daimler Chrysler
52058562 - Bracket, Pass Side Motor mount 2.5L

Got a pic before install and next to old for comparison?

This is a YJ only part.  TJ's use a mount similar to the 4.0L YJ which the 4.0L TJ also shares.  The 2.5L YJ is the only oddball.  Although I'm not sure about the XJ's.