4bangerjp.com

General Forums => The Mess Hall => Topic started by: jeepboy21 on November 06, 2006, 04:21:00 PM

Title: Help with alarm install.
Post by: jeepboy21 on November 06, 2006, 04:21:00 PM

I am installing an AUTOPAGE RF-215 in my YJ.  I just wanted a cheap alarm so I can hear it and run out to my jeep.  I need help finding the parking light relay output, where to get at the ignition relay. I believe it wants me to splice into the ignition switched 85 pin and 86 pin, grounded when armed.

Title: Help with alarm install.
Post by: Tall Boy on November 06, 2006, 07:02:12 PM

Get one of those pedal clubs too that lock the brake or clutch pedal to the floor. They are like $40.00.

Title: Help with alarm install.
Post by: Tall Boy on November 06, 2006, 07:04:32 PM

The relays for my Tj are in the engine compartment next to the battery in a long black box .

Title: Help with alarm install.
Post by: jeepboy21 on November 06, 2006, 08:23:10 PM

Quote from: "Tall Boy"

Get one of those pedal clubs too that lock the brake or clutch pedal to the floor. They are like $40.00.

i had thought of this option but they would still be able to get into the jeep w/o anyone knowing.

I was pretty sure thats where mine are but how do i get to the wires?  take the whole box out, splice into the wires, put the whole box back?

Title: Help with alarm install.
Post by: Tall Boy on November 06, 2006, 08:46:53 PM

1st you have to disconnect the battery and pull the relays, I believe, to totally disconnect the circuit, prior to touching the wires.

 My alarm system runs under my dash, done at the dealer when I bought it new. I have 4 security devices on my Jeep , and I still sleep with a firearm close by, and some silent weapons as well.  My best advice is to get the factory manual , like I bought,  for a hundred and some odd dollars. It tells me everything I need to know except aftermarket stuff.

Hopefully you can get at least a wiring diagram from someone here, if you let everyone know what year your Jeep is.

Title: Help with alarm install.
Post by: Jesse-James on November 06, 2006, 09:36:18 PM

Should be in the FSM.

http://www.4bangerjp.com/forums/viewtopic.php?t=414

For the record, I got a DEI Python with zone radar add on for 220.00 installed at Circuit City. They did a great job. Freaks people out when they stick their head in to look when my doors are off.

Title: Help with alarm install.
Post by: jeepboy21 on November 06, 2006, 09:51:45 PM

Quote from: "Tall Boy"

1st you have to disconnect the battery and pull the relays, I believe, to totally disconnect the circuit, prior to touching the wires.

 My alarm system runs under my dash, done at the dealer when I bought it new. I have 4 security devices on my Jeep , and I still sleep with a firearm close by, and some silent weapons as well.  My best advice is to get the factory manual , like I bought,  for a hundred and some odd dollars. It tells me everything I need to know except aftermarket stuff.

Hopefully you can get at least a wiring diagram from someone here, if you let everyone know what year your Jeep is.

thank you i wouldappreciate any help.  it is a 93 yj 2.5l 5spd

Title: Help with alarm install.
Post by: Tall Boy on November 07, 2006, 10:50:47 PM

Did those diagrams help ?

Title: Help with alarm install.
Post by: jeepboy21 on November 09, 2006, 01:19:53 AM

not for this job but i have them saved now. after looking at the directions some more, i needed a relay and to wire it into the ignition.  just went to a locla car auto store, only one in town that i will let touch any of my or my families vehicles,(just the jobs i cant/dont have time for).  45 bucks and everything works well. just gotta take apart the door and fix my window and door since the attempted break in.