4bangerjp.com
General Forums => The Mess Hall => Topic started by: Tee on December 08, 2006, 12:13:16 PM
-
Has anybody here looked into this? Only $7.00 I might get it for that price just to see what it entails.
http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-Turbo-Turbocharger-Guide-2-5L-E-BOOK_W0QQitemZ230060547872QQihZ013QQcategoryZ34224QQrdZ1QQcmdZViewItem
-
I'd love to turbo my jeep, but that looks like a horrible place to put one. A glowing red hot turbocharger less than a foot away from your battery and altornator :? At least he covered the alt. up with something to protect it.... also the price range is doubtful unless you have access to the parts already or have them laying around. I know I never find turbo's in the yards around here.
-
i wanna buy it , but dont feel like wasting 7 bucks
-
Tell you guys what. I'll buy it. If its not copy righted I will PDF it and distribute to all that want it.
-
i wanna buy it , but dont feel like wasting 7 bucks
Thats less than the price of a six pac!!!!
-
haha i dont buy beer either, 1st off im too young second off, i leach off others. lol
-
i leach off others.
Stay outta my garage then...... :wink:
-
haha i dont buy beer either, 1st off im too young second off, i leach off others. lol
Ouch. I'm twice old enouph :mrgreen:
-
Tell you guys what. I'll buy it. If its not copy righted I will PDF it and distribute to all that want it.
Says it's a pdf ebook. Cool, you buy it and then send it to me and anyone else that wants it. 8)
-
Ok, scratch that. I bought it. If it's not copyrighted I'll send it to anyone that wants it as soon as I get it. :D
-
would love a coppy let me know when you get it thanks.
-
I wouldn't mind a copy myself...
-
id like a copy too plz, ill do something in return for you dunno what but i will.
-
i' d take a copy also; e-mail to msc1954@msn.com
thanks
-
i would love a copy......
-
Copy here too please
-
Ok, I sent it to those who have their email addresses listed. For the others I sent a PM. If I missed anyone let me know.
-
yea bro thanks a lot
-
ill take a copy to lafatajo@msu.edu
thanks alot man
-
I sent you a pm. I would like a copy as well
-
THANKS JASON; YOU'RE THE MAN!!
-
send one here too, might as well jump on the bandwagon :lol:
-
Let me know if I missed anyone. :)
-
thank alot man i really appreciate it
has anyone actually tried this set up, the tuning seems alittle on the weak side
-
I would love a copy please.
darrylmlr@sbcglobal.net
thank you
-
Me too.
-
spaethdj@hotmail.com
please
thanks a lot!
-
May I have a copy too...
parkerag@mailbox.sc.edu
-
Me too.
I need an email address Tall Boy.
-
Thank you very much.
-
thank you... to bad i don't have a mpi 2.5.... :evil: ... but it gives me ideas for other projects for the future.
-
haha let me get a copy, i'll tell you guys what i do and dont like about the set-up. accord387@operamail.com
-
PM'd you
-
I p.m'd it to you. Thanks
-
i cant stand it any more! im in! 4angrysquirrels@gmail.com
thanks.
-
Send me one too. Would be nice to have over 200hp
Thanks
-
Everbody that got a copy......Lets start hearing reviews of the information!!!!
-
I would love a copy. jsprando@hotmail.com
Thanks.
-
dont like it. too close to the battery. too much exaust tubing pefor the turbo (more spull up time) a really hot exaust manafold nest to my altonater. no thanks there need to be alot more shelding for some of the vital parts in this set up. but over all not a bad idea. ive seen this done on the 4.0l 505 performance makse a kit for them. thats my input lets hear the others
-
Its defenitly a budget driven project.
I think a modified header with the turbo on that side would be cleaner/less tubing etc. But the price would go up.
PVC for the plumbing to and from the intercooler didn't sit well with me. But again, alum tubing and boots similar to whats on my Cummins would add to the price.
Overall I think he did a good job on a tight budget.
-
haha let me get a copy, i'll tell you guys what i do and dont like about the set-up. accord387@operamail.com
I sent a copy to you but it got kicked back. Here's what it said.
"Error 01373: User's Disk Quota Exceeded.
Sorry, your intended recipient has too much mail stored
in his mailbox.
Your message totalled 1355 Kbytes.
However a small (< 1Kb) message will be delivered should
you wish to inform your recipient you tried to email."
Clean out your in box and I'll resend it for you.
-
Its definately a complete budget set-up. I'd run steel braided oil lines, and atleast carbon steel charge pipes (pvc would work for what we need most likely, but like tee said it doesnt sit well with me either). I also do not recommend anyone doing the map trick, its probably getting old hearing me preach about Megasquirt, but i think its a good investment for anyone looking into forced induction. (i guess i should get around to a little write-up on it, finals are this week so maybe over my break)
-
Wrangler387,
why don't u like the "map trick"?
-
1. It moves you along bins already preset in your ecu (last i checked the stock ecu isn't programmed for a turbocharged motor)
2. It isn't programmable from my understanding, as in you increase or decrease the input across the entire table. Not just the specific RPM/MAP signals that need more or less fuel.
3. Along with moving along the fuel bins, you are also moving yourself along the timing bins also.
Megasquirt isn't very expensive and it allows you to have complete control over fuel, and also ignition if you set-up the vehicle for it. Not to mention it can be set-up to trigger water/alchy set-ups, it can be used as an electronic boost controller, it has a lot of nice features that would prove helpfull with turbocharged vehicles.
-
i would also like to see this! Datsun1977Z@aol.com Thank you much!
-
:smokes:
-
I would like it too if its not too difficult for ya.
coriolisstorm@gmail.com
or
just PM it to me. Either way is fine.
-
ooh ooh, pick me too!!
-
Also, there was an old one on an AOL page a few years back too. I tried to find it today, and it said the page was no longer supported. Have any of you followed that guy's method? Do any of you have his book?
-
Can you send me copy, brent.cring@magnapowertrain.com
Thanks
-
I also would like a copy, shank882000@yahoo.com If it isnt too hard for ya
-
I would like a copy of it to. plz. gamer288@aol.com
-
Well since I've got my YJ torn down from my wifes "suspension adjustment", might me a good time to look into this. I copy would be nice !! tctenng@tcc.edu
Gregg
-
Would like a copy sent... bearwint@yahoo.com
-
I wouldn't mind a copy of it if you still have the PDF. I was getting ready to order one from 505 performance soon anyways, but will take a look to see if it could save some change. 505 performance was open to a group buy if any one is interested, we could save big bucks buying all together. I told him I had (3) to do and he said 2,500 each and would come help install. so if we were in the same area??? Please send PDF to john@thecaissoncompany.com
-
I have the 1984 150ci 4 cyl AMC for a cj-7. will this turbo get me back on the hwy at a fast enough speed. here in Dallas Tx the motorists are in such a hurry. my tired 4 cyl. is doing her best!
I would love to have the pdf file please and if anyone is in the dallas/ft worth area maybe we can get together and figure out how to install it.
Thank you all, renin
-
If your still sending these out, could you please send me a copy. My email is FlyersPh9@gmail.com. I was thinking of putting my friends 8 cyl. in, but my dad is REALLY against it, so this will have to do! :-D
-
i would like a copy as well please
tmontana@texmontana.com
-
hi there guys i read the tread and i bought it months ago so if nobody has bought it yet i could pull it up and send it but it does take a lot of space up. i have not got around to doing anyting yet, i was kinda a bit confused. dont know much about turbos but it is very detailed.
-
Well you all have me wonderin. Can you please send me a copy as well. joshua.south@us.army.mil
thanx,
Josh
-
Sounds interesting. Shoot me a copy if you can. I'd really appreciate it.
bothgunsblazin@hotmail.com
-
So did anyone do this and have any luck, if so how much do you have in it?
-
Hey first timer here, looking to boost my 2.5. Could someone pleeze send me a copy of this!!
jeremycartwright_01@yahoo.com
Thanks!!
-
Hello, I am new to this forum, and was looking around. I know I am late on this, but is it possible to have a copy sent to my E-Mail? SDWE61988@yahoo.com
Thanks,
-
Could I get a copy. sezaro21@optonline.net. Thanks.
-
I'm locking this thread since it just turned into a grab bag and the OP hasn't been around for over a month.