4bangerjp.com
General Forums => The Mess Hall => Topic started by: omnisi on March 01, 2007, 10:38:34 AM
-
If I follow the link below:
http://bigredheep.com/~jeepwra/forumnews-id-3934.html
Do I need to cut off BOTH tubes, or just the vent tube. I thought the tube with the ball was to keep the fuel from spilling out on a roll-over or an anti-siphon tube. But, if it goes down as deep as the vent tube, will it keep the tank from filling as well?
SO, do I need to cut BOTH tubes?
Thanks
-
SO, do I need to cut BOTH tubes?
Thanks
According to that write-up you should cut both off!
-
(http://bigredheep.com/collin/images/content/TJ_gastank_mod/TJ_gastank_fillnventtubes.jpg)
-
Thats looks stupid on my part... but I saw that.
The reason I asked is because I read another write-up a while ago on another site that questioned whether or not there was a need to cut the other one off and I dont remember what the final word was... some said only the vent tube, and others said to cut both. Guess I could play it safe and just cut both...
I thought someone else might know...
-
Thats looks stupid on my part... but I saw that.
The reason I asked is because I read another write-up a while ago on another site that questioned whether or not there was a need to cut the other one off and I dont remember what the final word was... some said only the vent tube, and others said to cut both. Guess I could play it safe and just cut both...
I thought someone else might know...
I'm not certain what both of the lines are. I believe the one with the check valve is the main vent though.
-
Thanks