4bangerjp.com

General Forums => The Mess Hall => Topic started by: dexetr30 on March 19, 2007, 07:53:30 AM

Title: Need bumper bolt size.
Post by: dexetr30 on March 19, 2007, 07:53:30 AM

I was crawling around under the Jeep this morning and noticed the mounting bolts on the bottom of the bumper are m.i.a. Does anyone know what size bolts these are so I can replace them?

Title: Re: Need bumper bolt size.
Post by: bhawkin2 on March 19, 2007, 01:36:40 PM

I know the front bumper bolts are 1/2x13 atleat thats what I put in mine. 

Title: Re: Need bumper bolt size.
Post by: jagular7 on March 19, 2007, 02:02:04 PM

Yes, standard 1/2x13. The heads are a little different. If you are going to use a winch, use different head bolts. Most thieves just check to make sure you don't have lock down. Then grab their standard ratchet wrench and socket. They probably don't have the mind to pull multiple size sockets. Don't forget to use antiseize on them also. Helps with the removal when necessary.

Mine are SAE and Metric.

Title: Re: Need bumper bolt size.
Post by: dexetr30 on March 20, 2007, 06:33:38 AM

Thanks guys. I don't have a winch yet but I'm working on it.