4bangerjp.com

General Forums => The Mess Hall => Topic started by: Oilsmoke on September 25, 2005, 01:04:09 PM

Title: Hotter Spark Project
Post by: Oilsmoke on September 25, 2005, 01:04:09 PM

OK Here is my Idea. Lets build One here and Put up a Fact thread.

So where to start with it. Idea?
lets build say 3 systems with Parts#, cost , Urls to buy?

Lease costly with & eye towards Better than Stock Preformance.
Middle of the road type.
Balls out Set up.


Plugs
Cap & Rotor
Wires
Coil
Ingition Modules
Computer
Did i miss any parts that can be upgraded?

I was looking for a Coil and Came across these two.
http://store.summitracing.com/default.asp?target=partdetail.asp&part=ACC%2D140021&FROM=MG
http://store.summitracing.com/default.asp?target=partdetail.asp&part=MSD%2D8228&FROM=MG

Which is Better choice?

Title: Hotter Spark Project
Post by: Jeffy on September 25, 2005, 01:47:16 PM

Well, I've sorta gone through three different setups already.

Price, parts, performance I'd go with Performance Distributors

http://www.4bangerjp.com/forums/viewtopic.php?t=29

Title: Hotter Spark Project
Post by: chrisfranklin on February 28, 2006, 03:21:15 PM

Hey Jeffy. I was looking at the Performance Distributors site for the 2.5 Kit.  It doesn't look like they are offering it,yet.  Any idea on when its coming out?  Or, if its available, where can you purchase it?

Title: Hotter Spark Project
Post by: Jeffy on February 28, 2006, 07:46:40 PM

It's been out for a while.  They don't have it listed on their site though.  You'd have to call in.  Otherwise, q-tech sells them.

Title: Hotter Spark Project
Post by: Bounty Hunter on March 03, 2006, 01:37:53 PM

Bought mine through Quadratec, been real happy with it.  I need to open the plugs up some more, I think I played it too conservative at 0.050".

Title: Hotter Spark Project
Post by: Jeffy on March 03, 2006, 01:54:26 PM

Quote from: "Bounty Hunter"

Bought mine through Quadratec, been real happy with it.  I need to open the plugs up some more, I think I played it too conservative at 0.050".

Should of went to .060".  That's what PD suggested.

Title: Hotter Spark Project
Post by: Bounty Hunter on March 04, 2006, 05:37:07 AM

I thought they suggested .065"?

Title: Hotter Spark Project
Post by: jwrape on March 04, 2006, 06:04:08 AM

Quote from: "Jeffy"

Well, I've sorta gone through three different setups already.

Price, parts, performance I'd go with Performance Distributors

http://www.4bangerjp.com/forums/viewtopic.php?t=29

So where do you buy this kit?

Title: Hotter Spark Project
Post by: Jeffy on March 04, 2006, 12:34:22 PM

Quote from: "Bounty Hunter"

I thought they suggested .065"?

Whoops, you're right!  It's .065" not .060".  It's been so long I forgot, LOL!   :roll:

Title: Hotter Spark Project
Post by: Jeffy on March 04, 2006, 12:36:47 PM

Quote from: "jwrape"

Quote from: "Jeffy"

Well, I've sorta gone through three different setups already.

Price, parts, performance I'd go with Performance Distributors

http://www.4bangerjp.com/forums/viewtopic.php?t=29

So where do you buy this kit?

Qtech sells them.  You can buy them directly form the company though.  http://www.performancedistributors.com/.  Let them know you're on the 4banger forum.

Title: Re: Hotter Spark Project
Post by: RickBrins on July 15, 2015, 11:12:52 PM

What plugs do you suggest for this set up?

Title: Re: Hotter Spark Project
Post by: Jeffy on July 15, 2015, 11:26:42 PM

Quote from: RickBrins on July 15, 2015, 11:12:52 PM

What plugs do you suggest for this set up?

I'm using Autolite 985 Copper Core Spark Plug.  These are the copper versions that Performance Distributors sent me when I R&D'ed the FirePower Ignition - http://performancedistributors.com/product/jeep/.  They originally sent me the Platinum versions of the same plugs but I think the Jeep likes the Copper's more.  Not to mention the coppers are dirt cheap.

Title: Re: Hotter Spark Project
Post by: RickBrins on July 16, 2015, 07:04:12 AM

Thanks Jeffy, I was wondering if you stuck with those,.