4bangerjp.com

General Forums => The Mess Hall => Topic started by: tallrugbyguy on November 25, 2008, 10:32:10 AM

Title: Body tub fit
Post by: tallrugbyguy on November 25, 2008, 10:32:10 AM

just wondering if a tub from 89 yj would fit a 95? just double checking that they dident change it at all right? \
thanks guys

Title: Re: Body tub fit
Post by: oldjeep on November 25, 2008, 10:38:27 AM

Quote from: tallrugbyguy on November 25, 2008, 10:32:10 AM

just wondering if a tub from 89 yj would fit a 95? just double checking that they dident change it at all right? \
thanks guys

Yup, it'll fit.  Only difference that might bring you problems is that the 89 tub will have the mounting locations for the baby crusher rollbar which are slightly different than those for the family cage in the 95.

Title: Re: Body tub fit
Post by: Tsd on November 26, 2008, 11:39:05 AM

Quote from: oldjeep on November 25, 2008, 10:38:27 AM

Yup, it'll fit.  Only difference that might bring you problems is that the 89 tub will have the mounting locations for the baby crusher rollbar which are slightly different than those for the family cage in the 95.

Laughed my ass off :drink:

Title: Re: Body tub fit
Post by: VA_YJ on November 26, 2008, 03:07:39 PM

Can I retrofit the baby crusher into my '95?  It sounds like a great upgrade.

Title: Re: Body tub fit
Post by: Matt vs YJ on November 27, 2008, 10:44:23 AM

The bars will swap very easy. I put '95 bars into my '89 and only had to enlarge 2 holes, but the rest lined up fine.

The tub should swap easily as well, but keep in mind that you may have to drill a few holes in the firewall. I know for a fact that the clutch master cylinder was changed. To install a '95 master I need to drill one additional hole.

Title: Re: Body tub fit
Post by: tallrugbyguy on November 28, 2008, 09:36:19 AM

sweet, thanls guys.