4bangerjp.com
General Forums => The Mess Hall => Topic started by: bestos on January 14, 2009, 04:54:44 AM
-
anyone out there with ARB snorkel for YJ? I bought mine used. only thing it did not come with is pattern for hole drilling.
I called ARB they sent me a 3 page PDF (which i have to cut apart and tape together) of the pattern with 1" marks for reference and the marks are NOT an inch, they are roughly 1-1/8". So I dont trust using it.
If someone could help me out, I would appreciate it.
-
I have the pattern, but have not installed the snorkel yet... You are welcome to have the patern after I am done with it.
-
alright!! work on it soon as ya can :) ha! im dying to get to work on this thing!
i did all the airbox work for mine already. that was a bit of a challenge. I got 2 rives going 1 way, and 2 going another. because of my rivets and my rivet "gun" - i put the head of 2 rivets in the airbox for the top 2 rivets. the bottom 2 rivets the head is on the outside as the instructions show. have the top rivets on inside was only way i could get them tight because of the metal air inlet is kind of in its own way :)
-
Why not rescale the pdf? It's probably something wrong with the program and the way it prints it. You can send me the pdf and I'll look at it.
-
get my email?
-
get my email?
Next to most peoples profiles there is this icon. (http://4bangerjp.com/forums/Themes/darkgreen/images/email_sm.gif) (jeffy@4bangerjp.com). Click it, or click this one.