4bangerjp.com

General Forums => The Mess Hall => Topic started by: drunkencityworker on July 01, 2009, 12:24:51 PM

Title: sua issue
Post by: drunkencityworker on July 01, 2009, 12:24:51 PM

i did a 4" superlift sua. i have noticed my front seems to lean to the drvr side bout an inch. could this be a shackle prob(stock) or a dead spring? seems front only. no track or sways are in my yj.

Title: Re: sua issue
Post by: neale_rs on July 01, 2009, 12:38:18 PM

First make sure the shackle and spring eyes can move easily.  Jack up that corner from the bumper and see if it droops ok.  Most likely it is the spring or something too tight to move properly.

Title: Re: sua issue
Post by: lanulos89 on July 01, 2009, 11:15:44 PM

like ^  make sure you didnt over tighten the through bolts one the shackles

Title: Re: sua issue
Post by: jfrabat on July 02, 2009, 07:11:20 AM

X3; in my case, I use greasable shakles, and still I tighten my shackle bolts less than speced in the FSM (I do use lock-nuts, though) to kee them moving freely.

Title: Re: sua issue
Post by: drunkencityworker on July 03, 2009, 04:18:12 PM

thanks for replies. i checked and didnt change anything. they were a bit tight. one more thing to add to the yj list. shackles and a new spring. might upgrade and get a match for the front