4bangerjp.com

General Forums => The Mess Hall => Topic started by: 93yjFirstJeep on September 12, 2009, 04:33:26 PM

Title: WAT THE F!!!!
Post by: 93yjFirstJeep on September 12, 2009, 04:33:26 PM

So i just put in my new 4.0tb and its revved to 6k before i changed the ais housing over, so i changed it over and now its idleing at 3500 to 4k, i reset the computer and swapped everything, WHAT THE F IS WRONG!!!!  :brick:

Title: Re: WAT THE F!!!!
Post by: 93yjFirstJeep on September 12, 2009, 05:23:28 PM

so the 4 bolts that hold on the throttle body were loose so i tightened them, then it idled about 1500, so i took out the ais motor and cleaned the plunger, now it idles about 1400 and it has a really loud whistling sound  :brick:  :brick:  :brick:

Title: Re: WAT THE F!!!!
Post by: Tsd on September 12, 2009, 05:46:40 PM

I think there is a "waiting time" involved so the computer can reprogram itself. For what i have read you have to drive a few miles so that the computer can re-learn all the data.

Check the FAQ, Jeffy wrote a write up about this subject:

http://4bangerjp.com/forums/index.php/topic,8.0.html

Title: Re: WAT THE F!!!!
Post by: 93yjFirstJeep on September 12, 2009, 05:51:41 PM

Well there was a crack in the body itself from something that wasnt letting me tighten the ais housing, so i just hit it with a hammer until it was back to normal and now it works

Title: Re: WAT THE F!!!!
Post by: Tsd on September 12, 2009, 05:53:36 PM

Well.... "if you can't fix it...you need a bigger hammer"   :lol:
Glad you worked it out.