4bangerjp.com
General Forums => The Mess Hall => Topic started by: KS_Caveman on October 22, 2009, 08:04:27 PM
-
I added some off road lights to my 06 Jeep Wrangler and used the cigarette lighter ground to ground the lights out of laziness, and must of blew a fuse. Now I can turn my headlights on but I have no back lights on my cluster panel or radio, and no tail lights. I do have brake lights. PLEASE HELP.
-
I'm not 100% sure on TJ's but there is a small 15amp fuse in the power distribution box under the hood on the YJ.
-
Did you check the fuse panel on the side of the dash on the driver side?
-
Dash and tail lights are the same fuse in the panel by your left foot
-
Where Is the fuse Block? I know there is one behind the glove box but I looked on drivers side and did not see one???
-
Where Is the fuse Block? I know there is one behind the glove box but I looked on drivers side and did not see one???
The 06 threw me off. IIRC the older TJ's have a fuse panel on the driver corner of the dash.
Check your owners manual.
Best of luck.
-
:stupid: I thank I found the problem, my #1 (20 amp parking light) and #2 (20 amp stop light) were blown. I swear in my old age I checked the darn things. :brick: But I hope that this will fix my problem...
-
:brick: :brick: :brick: That was the problem, Thanks for all the help.