4bangerjp.com

General Forums => The Mess Hall => Topic started by: mikeymuy on February 22, 2010, 08:49:24 PM

Title: coil and wires need some help?
Post by: mikeymuy on February 22, 2010, 08:49:24 PM: hey guys iam gonna get my coil and wires which set up should i go wit msd or performance dist Screamin Demon Coil setup ? msd coil is couple bucks cheaper and its msd works great on my v8.... info needed thanks
Title: Re: coil and wires need some help?
Post by: Jeffy on February 22, 2010, 08:50:16 PM: Personally, I like the PD but I'm probably a bit biased.
Title: Re: coil and wires need some help?
Post by: FourbangerYJ on February 22, 2010, 09:49:41 PM: I think most of us on this board with upgrades run the PD coil and wires. Myself included.
Title: Re: coil and wires need some help?
Post by: jfrabat on February 23, 2010, 10:17:44 AM: Quote from: FourbangerYJ on February 22, 2010, 09:49:41 PM
I think most of us on this board with upgrades run the PD coil and wires. Myself included.

Ad me to this list...
Title: Re: coil and wires need some help?
Post by: TrailsLessTaken on February 23, 2010, 02:18:25 PM: I like the PD kit that im running too
Title: Re: coil and wires need some help?
Post by: Mozman68 on February 24, 2010, 09:16:09 AM: I'm having trouble finding a complete kit from PD...do they have one on-line that I'm not seeing??
Title: Re: coil and wires need some help?
Post by: Jeffy on February 24, 2010, 01:02:22 PM: Quote from: Mozman68 on February 24, 2010, 09:16:09 AM
I'm having trouble finding a complete kit from PD...do they have one on-line that I'm not seeing??
PD sells them.
Title: Re: coil and wires need some help?
Post by: Mozman68 on February 24, 2010, 01:49:36 PM: Quote from: Jeffy on February 24, 2010, 01:02:22 PM
PD sells them.

Yep...but where is it on their site?? I just see separate items listed.
Title: Re: coil and wires need some help?
Post by: FourbangerYJ on February 24, 2010, 01:54:18 PM: Quote from: Mozman68 on February 24, 2010, 01:49:36 PM
Yep...but where is it on their site?? I just see separate items listed.

http://www.performancedistributors.com/jeep.htm P/N 2.5kit

Just make sure you don't put the plug wires on backwards :whistle: It will save you the trouble of asking for help as to why it won't start :wall:
Title: Re: coil and wires need some help?
Post by: Mozman68 on February 24, 2010, 02:11:59 PM: Thank you...I was confused on their live wires page as it doesn't list my Jeep engine and year....they stop at 1999 and then jump right to the 2.4l....
Title: Re: coil and wires need some help?
Post by: jfrabat on February 24, 2010, 05:06:46 PM: Quote from: Mozman68 on February 24, 2010, 02:11:59 PM
Thank you...I was confused on their live wires page as it doesn't list my Jeep engine and year....they stop at 1999 and then jump right to the 2.4l....

That's because, in reality, your Jeep does not exist... :wall:
Title: Re: coil and wires need some help?
Post by: Torch_Ind on February 24, 2010, 05:37:49 PM: I'm running accel coil and went to a universal style with bolt on leads and works great think I'm running NGK wires but can't remember would have to go look

(http://go.mrgasket.com/ProductImages/120/8140HV.jpg)
Title: Re: coil and wires need some help?
Post by: dwtaylorpdx on February 27, 2010, 11:36:59 PM: I scope tested a bunch of coils at one point and it takes a LOT
of coil to out perform the Jeep stock air cooled coil.

Ran all of them off a MSD 6AL they all came out within
about 8KV of each other.

What we did notice was the MSD air cooled coil would produce
more current than most at high RPM (10'000)

And AIr cooled coils in general pulled less current
on the low voltage side than the oil cooled.

Dave