4bangerjp.com
General Forums => The Mess Hall => Topic started by: 95yjman on March 06, 2010, 07:32:00 PM
-
My cherokee needs a new battery, but the postive side terminal is really really stuck on. I tapped it with a hammer and it slowly moves over, I took a pry bar and pryed on it a bit but it just flexes the top of the battery. Any other ideas on how to get it off? Might be a dumb question but can I spray PB blaser or WD 40 on it to maybe try and eat at some of those bad things that are causing it to stick? I don't want to break anything right now as the YJ is sitting in the garage with no Transfer case, can't be out two vehicles :lol:
-
If you want to get really fancy you can buy the correct tool for the job:
http://www.amazon.com/KD-Tools-202-Battery-Terminal/dp/B0002SRDRS
Personally I would just remove the bolt completely and then tap a big screwdriver in the slot to spread the clamp.
-
Personally I would just remove the bolt completely and then tap a big screwdriver in the slot to spread the clamp.
x2 :thumb:
-
heh thats a really good idea, I never think of this stuff....Thanks! :thumb:
-
also, hot water removes the deposits best
but that's more after you manage to take off the terminal and that's an x2 for the bolt suggestion.
-
Hot water and baking soda is the ticket for removing the gunk
-
thanks guys, I ended up getting it today. :thumbsup: