4bangerjp.com
General Forums => The Mess Hall => Topic started by: Sine Deviance on March 09, 2010, 03:06:02 PM
-
Anyone know what thread they are or where I can get them? Somehow all of mine rattled out.
-
Anyone know what thread they are or where I can get them? Somehow all of mine rattled out.
i'll measure them tonight, still have them out (only have the big ones) - I assume you are asking about the bellhousing inspection cover that thread into the bellhousing and not the ones with nuts at the other end. they are weird looking from what i remember (are pointed and have thread all the way like the auto-threading screws). If i am to guess they are M8 (metric 8 mm) but i'll confirm tonight.
-
i'll measure them tonight, still have them out (only have the big ones) - I assume you are asking about the bellhousing inspection cover that thread into the bellhousing and not the ones with nuts at the other end. they are weird looking from what i remember (are pointed and have thread all the way like the auto-threading screws). If i am to guess they are M8 (metric 8 mm) but i'll confirm tonight.
Yep, those are the ones, and I was talking about the bellhousing cover :biggrin: It'd be the bottom four bolts, they don't seem to have nuts on them (so... they're nutless? :lol: )
Thanks a bunch. If I can pick up some replacements at an auto parts store that would be awesome.
-
there is one of these on the insp cover
(http://i57.photobucket.com/albums/g222/sharpxmen/Misc/insp_cover_screw_1.jpg) (http://i57.photobucket.com/albums/g222/sharpxmen/Misc/insp_cover_screw_2.jpg)
the way you look at the cover from the front towards the rear of the vehicle is located on the top right (driver's side) of the insp cover.
i have no idea what kind of bolt this is
the 2 bolts on the bottom are M12 (metric 12) and about 2-3/4'' long (or even 2-1/2), if you miss those you can use 1/2'' bolts no problem.
-
Awesome, I'll pick some up next time I hit AutoZone. Thanks again.
-
Awesome, I'll pick some up next time I hit AutoZone. Thanks again.
forgot to mention that the 2 bolts on the bottom have nuts (nylock ones)
-
Thanks, I'll keep that in mind when I go looking for replacements...