4bangerjp.com

General Forums => The Mess Hall => Topic started by: jinxjay on May 26, 2011, 04:04:47 PM

Title: running problem
Post by: jinxjay on May 26, 2011, 04:04:47 PM

hi folks, I was wondering if anyone had any ideas on a problem of mine,

i've looked through the boards but cant find anyone with the same problem as me.

I have a 1989 wrangler with 2.5 tbi,

it starts fine cold, idles ok and drives for about 5 minutes, till the temp gets about !/4 of the way up,

then it starts cutting out, dropping rpm's then stalling and a flat spot a mile wide.

if you can nurse it through this for 3 to for minutes it just clears, and when up to temp runs perfect no stalling or any other issues,

has anybody got any ideas???

thanks in advance Jason.

Title: Re: running problem
Post by: sharpxmen on May 26, 2011, 08:31:00 PM

ECM temp sensor maybe? unless it's some fuel delivery issue. This is in case your problems are not just at idle but loss of power when driving as well.