Author Topic: 4 port nozzle injectors in a tj  (Read 3461 times)

0 Members and 1 Guest are viewing this topic.

cman

  • Guest
Re: 4 port nozzle injectors in a tj
« Reply #15 on: March 13, 2012, 05:17:14 PM »
Ok i get it now
Them ones i listed are just stock Dodge 1995-97 NEON DOHC Fuel Injectors

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: 4 port nozzle injectors in a tj
« Reply #16 on: March 13, 2012, 05:44:04 PM »
Ok i get it now
Them ones i listed are just stock Dodge 1995-97 NEON DOHC Fuel Injectors

I meant the ones you listed here (didn't check the other ones, and to be honest these ones are good as far as flow with about a 5% increase over stock, i was wrong before saying it was minimal, Jeffy got the stock flow right at 23.2 for some reason i was remembering 24.2)
I did find these http://www.fiveomotorsport.com/jeep-23lb-fuel-injectors
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

cman

  • Guest
Re: 4 port nozzle injectors in a tj
« Reply #17 on: March 15, 2012, 11:36:15 AM »
Does any one know any thing about these ones Accel #110-150124
http://www.jegs.com/i/Accel/110/150124/10002/-1?parentProductId=749691

cman

  • Guest
Re: 4 port nozzle injectors in a tj
« Reply #18 on: March 15, 2012, 12:42:44 PM »
Does any one know any thing about these ones Accel #110-150124
http://www.jegs.com/i/Accel/110/150124/10002/-1?parentProductId=749691

Does any one know if they are one nozzle hole or four nozzle hole ones

cman

  • Guest
Re: 4 port nozzle injectors in a tj
« Reply #19 on: March 16, 2012, 08:53:29 AM »
was taking to ACCEL and they are the 4 hole hozzle ones thats good news
so witch ACCEL injectors should I buy for my 1998 JEEP TJ 2.5L
see i need new one of mine is bad wood you buy the accel 23 ones or the 24 ones or the 21 ones







Signature
Chris
North nova member
98 jeep TJ 4 cyl.rc 3.25 lift rear 3.50 rc/bds front,Adjustable track bar 1.25 body lift motor
lift durango box catback cold air-intake, Rugged Ridge 8500 winch 4.88 gears, 60mm TB & spacer Yukon locker solid diff covers M/T 32", JKS Disconnects Chromoly rear axles crossover steering
 







« Last Edit: March 16, 2012, 08:55:19 AM by cman »

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: 4 port nozzle injectors in a tj
« Reply #20 on: March 16, 2012, 10:00:51 AM »
was taking to ACCEL and they are the 4 hole hozzle ones thats good news
so witch ACCEL injectors should I buy for my 1998 JEEP TJ 2.5L
see i need new one of mine is bad wood you buy the accel 23 ones or the 24 ones or the 21 ones

it depends on what you're trying to achieve, both will work but

24lb/hr at 43.5psi would result in a 25.5lb/hr flow with the 49psi which is 10% over stock (imo this is too much)

23lb/hr at 43.5psi means you'll get 24.4lb/hr at 49 psi and that's 5% which is what i would go for but that's all up to you in the end
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

cman

  • Guest
Re: 4 port nozzle injectors in a tj
« Reply #21 on: March 16, 2012, 12:56:10 PM »
ok thanks and accel to go to e-mail them and ask
http://www.hesco.us/shop.asp?catID=7533
did you see all the stuff they sell
headers and cams and stuff

and yes 5% to 7% is what i looking for
thanks i was thinking the 23 ones too
« Last Edit: March 16, 2012, 01:10:56 PM by cman »