« previous next »
Pages: [1]   Go Down

Author Topic: Vacuum line routing?  (Read 766 times)

0 Members and 2 Guests are viewing this topic.

Offline bigal389

  • Member
  • Posts: 62
Vacuum line routing?
« on: April 28, 2014, 08:13:22 AM »
It's been a while since I have had time to do anything to my Yj do to other projects. But here's the question, when I installed the new engine a couple months back I eliminated the egr.
How shuold I run the vac. line to the charcoal canister since I have no egr, or should I just plug the vac. going to the egr and leave it as is?
Thanks, Al
Logged
87 Jeep Yj 2.5 all stock for now

Offline chardrc

  • Member
  • Posts: 3535
Re: Vacuum line routing?
« Reply #1 on: April 28, 2014, 05:01:03 PM »
I would just run the line from the charcoal canister that Teed into the EGR valve straight to the purge valve. so either plug the vacuum line to the egr valve or remove it and make a new line from the canister to the valve. (red line in the link)

http://i164.photobucket.com/albums/u25/chardrc/vacumediagramcolor.png
« Last Edit: April 28, 2014, 05:01:28 PM by chardrc »
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Offline bigal389

  • Member
  • Posts: 62
Re: Vacuum line routing?
« Reply #2 on: April 29, 2014, 10:48:50 AM »
That was pretty much what I was thinking as well.
Thanks, Al
Logged
87 Jeep Yj 2.5 all stock for now
Pages: [1]   Go Up
« previous next »