« previous next »
Pages: [1]   Go Down

Author Topic: sua issue  (Read 696 times)

0 Members and 1 Guest are viewing this topic.

drunkencityworker

  • Guest
sua issue
« on: July 01, 2009, 12:24:51 PM »
i did a 4" superlift sua. i have noticed my front seems to lean to the drvr side bout an inch. could this be a shackle prob(stock) or a dead spring? seems front only. no track or sways are in my yj.
Logged

Offline neale_rs

  • Member
  • Posts: 3583
Re: sua issue
« Reply #1 on: July 01, 2009, 12:38:18 PM »
First make sure the shackle and spring eyes can move easily.  Jack up that corner from the bumper and see if it droops ok.  Most likely it is the spring or something too tight to move properly.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

lanulos89

  • Guest
Re: sua issue
« Reply #2 on: July 01, 2009, 11:15:44 PM »
like ^  make sure you didnt over tighten the through bolts one the shackles
Logged

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: sua issue
« Reply #3 on: July 02, 2009, 07:11:20 AM »
X3; in my case, I use greasable shakles, and still I tighten my shackle bolts less than speced in the FSM (I do use lock-nuts, though) to kee them moving freely.
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

drunkencityworker

  • Guest
Re: sua issue
« Reply #4 on: July 03, 2009, 04:18:12 PM »
thanks for replies. i checked and didnt change anything. they were a bit tight. one more thing to add to the yj list. shackles and a new spring. might upgrade and get a match for the front
Logged
Pages: [1]   Go Up
« previous next »