« previous next »
Pages: [1]   Go Down

Author Topic: Single shear shock mount  (Read 912 times)

0 Members and 1 Guest are viewing this topic.

Offline neale_rs

  • Member
  • Posts: 3583
Single shear shock mount
« on: June 16, 2011, 10:14:23 AM »

How thick should the material be for a single shear shock mount?  Let's say it sticks out perpendicular to the mounting surface (welded on) only about 1" or 1.5".  1/4" stock seems too thin to me.  Would 3/8" be enough or would 1/2" be needed to be strong enough?

Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Single shear shock mount
« Reply #1 on: June 16, 2011, 11:21:39 AM »
Quote from: neale_rs on June 16, 2011, 10:14:23 AM
How thick should the material be for a single shear shock mount?  Let's say it sticks out perpendicular to the mounting surface (welded on) only about 1" or 1.5".  1/4" stock seems too thin to me.  Would 3/8" be enough or would 1/2" be needed to be strong enough?



where would this be welded on?
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline neale_rs

  • Member
  • Posts: 3583
Re: Single shear shock mount
« Reply #2 on: June 16, 2011, 11:26:05 AM »
An axle tube or on a u-bolt skid plate, pretty stiff surface.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch
Pages: [1]   Go Up
« previous next »