« previous next »
Pages: [1]   Go Down

Author Topic: Seat Riser Cracks  (Read 747 times)

0 Members and 1 Guest are viewing this topic.

Wheezer

  • Guest
Seat Riser Cracks
« on: October 01, 2011, 06:13:54 PM »
I have a '95YJ and I recently discovered cracks in the driver's seat riser... Again. I had a couple cracks welded about 5 years ago. So evidently welding alone won't do it. Anyone have any ideas for a permanent fix? I'm thinking of replacing it and then working on re-inforcing it before it cracks. Thanks!

Wheezer
Logged

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Seat Riser Cracks
« Reply #1 on: October 01, 2011, 07:39:44 PM »
Quote from: Wheezer on October 01, 2011, 06:13:54 PM
I have a '95YJ and I recently discovered cracks in the driver's seat riser... Again. I had a couple cracks welded about 5 years ago. So evidently welding alone won't do it. Anyone have any ideas for a permanent fix? I'm thinking of replacing it and then working on re-inforcing it before it cracks. Thanks!

Wheezer

i don't have the stock risers anymore, but i think they crack once the rivets (if i remember correctly) get loose a bit so the stamped parts start "working" more, might want to look into that.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline grumpygy

  • Member
  • Posts: 882
Re: Seat Riser Cracks
« Reply #2 on: October 02, 2011, 09:46:31 AM »
I just put this riser in.

http://www.quadratec.com/products/24291_0004.htm

But my seat is a little taller than stock. and I still sit lower than stock.  About 1/2 inch.
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's
Pages: [1]   Go Up
« previous next »