Author Topic: anyone used this magnaflow muffler or similar?  (Read 815 times)

0 Members and 3 Guests are viewing this topic.

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
anyone used this magnaflow muffler or similar?
« on: August 17, 2011, 11:20:34 PM »
I'm trying to get something skinny so i can make room to relocate the shock on the rear passenger side upper mount (move it higher up and forward to gain some travel and be able to relocate the lower mounts on the axle as well) - i was looking at this magnaflow muffler, summit has it cheaper than the msrp listed but what i am interested in is how loud is it compared to an oval (direct fit) magnaflow - they are both straight thru but i have no idea if one is louder or sounds better than the other.
http://www.magnaflow.com/02product/displayapplications.asp?partnumber=14415
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline dwtaylorpdx

  • Member
  • Posts: 1038
Re: anyone used this magnaflow muffler or similar?
« Reply #1 on: August 19, 2011, 11:14:21 PM »
They are fairly loud, a 2.5 in pipe inside a 4" tube is not a lot of space to muffle sound, that unit is more of a resonator.
On a YJ the muffler is up right behind the cat converter, You may be able to fit one there?

Good Luck
Dave
94 YJ - 2.5 Hesco Cam B&B Ported - AX5 Trans w/Centerforce Dual Friction Clutch - 4" Rough Country Lift W/Skyjacker Shocks - D44 Rear/ARB - D30/ARB - ARB Compressor - Warn M8000 in Custom Bumper - Reunell Rear Bumper - Metalcloak 6" Body Armor Kit - Tuffy Console - 265x85-16 Tires - 2M Radio

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: anyone used this magnaflow muffler or similar?
« Reply #2 on: August 20, 2011, 03:25:47 AM »
They are fairly loud, a 2.5 in pipe inside a 4" tube is not a lot of space to muffle sound, that unit is more of a resonator.
On a YJ the muffler is up right behind the cat converter, You may be able to fit one there?

Good Luck
Dave

the oval shape on the stock muffler does not give me room to offset the shock away from the frame at all, was looking for a skinny alternative. I'm just wondering how much louder compared to an oval magnaflow (4x9'') - so one dimension is the same and about 1/2 on the horizontal.

EDIT: it will fit so that's not a problem. both the oval and the round are pretty much the same internally, straight thru from what i understand, i will check to see if a 5'' round will fit, that might be a better alternative.
« Last Edit: August 20, 2011, 03:32:36 AM by sharpxmen »
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end