« previous next »
Pages: 1 [2]   Go Down

Author Topic: What grade bolt?  (Read 3636 times)

0 Members and 2 Guests are viewing this topic.

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: What grade bolt?
« Reply #15 on: February 27, 2012, 02:32:35 PM »
Quote from: neale_rs on February 27, 2012, 08:09:18 AM
Thanks for that information.

I finally found a 1/2" bolt this weekend, I was driving and suddenly saw a bolt and metal store and decided to cut across a few lanes or traffic and see what they had. 

Got it installed and now it seems the fabricator did not put a sleeve all the way across so now I'm on a search for sleeve material.  It just goes on and on!


At least sleeve material is pretty easy to come by. Even pipe from the hardware store works (plumbing section) Plenty strong and cheap!
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline neale_rs

  • Member
  • Posts: 3583
Re: What grade bolt?
« Reply #16 on: February 27, 2012, 02:44:33 PM »
Sounds good, thanks for the tip.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: What grade bolt?
« Reply #17 on: February 27, 2012, 02:52:56 PM »
Quote from: FourbangerYJ on February 27, 2012, 02:32:35 PM
At least sleeve material is pretty easy to come by. Even pipe from the hardware store works (plumbing section) Plenty strong and cheap!

as long as you find something close enough (but some machining might still be required) - not sure what his OD is but pipe standard for common sizes are

Size / OD / ID variations (3 or 4 different sizes)

1/4 / 0.540 / 0.410, 0.364, 0.302
3/8 / 0.675 / 0.545, 0.493, 0.423
1/2 / 0.840 / 0.674, 0.622, 0.546, 0.466

looks like 3/8 or 1/2 would be fairly close candidates


Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline neale_rs

  • Member
  • Posts: 3583
Re: What grade bolt?
« Reply #18 on: February 27, 2012, 03:03:48 PM »
Good info.  Thanks

Will have to measure the OD but for ID the .545" looks good.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: What grade bolt?
« Reply #19 on: February 27, 2012, 03:12:04 PM »
Quote from: neale_rs on February 27, 2012, 03:03:48 PM
Good info.  Thanks

Will have to measure the OD but for ID the .545" looks good.

i would rather think .493 and run a 1/2 bit thru it from both sides. the 1/2'' bolt is not 1/2 inch but more like .490 or so (since i thought all this was related to the M12 vs 1/2'' which is about the same difference if you go with .545)
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline neale_rs

  • Member
  • Posts: 3583
Re: What grade bolt?
« Reply #20 on: February 27, 2012, 03:35:48 PM »
That's a good way to get the most snug fit.  Thanks for the idea.





Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline neale_rs

  • Member
  • Posts: 3583
Re: What grade bolt?
« Reply #21 on: March 09, 2012, 02:41:25 PM »
The needed OD was 0.75 with ID close to 0.5 so no water pipes fit exactly (plus the 3/8 size was not to be found in several hardware stores including Home Depot).  Finally ended up getting a length of 0.75 OD, 0.52 ID seamless pipe that is supposedly used for hydraulic systems.  Weather has been cold and rainy here so might finally get it done in about a week.

Thanks for all the comments.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: What grade bolt?
« Reply #22 on: March 09, 2012, 04:11:07 PM »
Quote from: neale_rs on March 09, 2012, 02:41:25 PM
Finally ended up getting a length of 0.75 OD, 0.52 ID seamless pipe that is supposedly used for hydraulic systems.
good find.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline neale_rs

  • Member
  • Posts: 3583
Re: What grade bolt?
« Reply #23 on: March 21, 2012, 01:58:18 PM »
Update:

Finally got some time and good weather to get this rear support installed.  Thanks for all the comments and suggestions.



Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch
Pages: 1 [2]   Go Up
« previous next »