« previous next »
Pages: 1 2 [3]   Go Down

Author Topic: Stupid Transfer Case Plug  (Read 5265 times)

0 Members and 2 Guests are viewing this topic.

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
Re: Stupid Transfer Case Plug
« Reply #30 on: September 10, 2012, 06:37:52 PM »
Bounty Hunter FTW.

T55 torx bit and my new breaker bar did it...had to after I realized I didn't have the correct drill conversion piece to attach the #7 extracter bit.

Big squeak and it loosened right up...fluid level was fine...put a few pumps in to make sure it is full.  Must be a very slow leak.  Or I wonder if it is just a breather tube somewhere?
« Last Edit: September 10, 2012, 06:38:09 PM by Mozman68 »
Logged
2009 Audi S5....what....its 4wd...sort of....

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: Stupid Transfer Case Plug
« Reply #31 on: September 10, 2012, 06:39:39 PM »
Quote from: Mozman68 on September 10, 2012, 05:22:29 PM
Looks like they have anti seize on them already...still drinking beer...will head out in a bit to get the old one off.

it's probably dry sealant paste, i doubt they use anti-seize on them.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline aka-justin

  • Member
  • Posts: 883
Re: Stupid Transfer Case Plug
« Reply #32 on: September 10, 2012, 09:08:28 PM »
Quote from: Mozman68 on September 10, 2012, 05:59:27 PM
I like to have at least two beers in me before I start drilling into major drive components of my Jeep...

It seems to be in the FSM somewhere - its my modus operandi :beers:
Logged
[1995 YJ 2.5L with 4" lift on 31" KM2 - Sold] 1995yj
[2003 TJ Rubicon 4.0L with 4" lift on 35" Wrangler M/T - Sold]
To be continued...
--Justin

Offline AWK

  • 4BangerJP.com® Donator
  • Member
  • *
  • Posts: 45
Re: Stupid Transfer Case Plug
« Reply #33 on: September 12, 2012, 06:42:24 AM »
Quote from: Mozman68 on September 10, 2012, 05:59:27 PM
I like to have at least two beers in me before I start drilling into major drive components of my Jeep...

Quote of the day! :thumb:
Logged

Offline aparke4

  • Member
  • Posts: 48
Re: Stupid Transfer Case Plug
« Reply #34 on: October 01, 2012, 09:55:15 AM »
please get rid of the damn recessed hex! worse thing known to man...

plug is a 22x1.5 metric. lots of options to go with for the fill and drain...

here is a thread i started on jeepforum:

http://www.jeepforum.com/forum/f9/magnetic-transfer-case-drain-plug-np231-upgrade-1415119/

 
Logged

SDWE61988

  • Guest
Re: Stupid Transfer Case Plug
« Reply #35 on: October 04, 2012, 08:07:43 AM »
link=topic=10757.msg95794#msg95794 date=1347321567]
I like to have at least two beers in me before I start drilling into major drive components of my Jeep...
[/quote]

It calms the nerves!  :beer: :beer:
Logged
Pages: 1 2 [3]   Go Up
« previous next »