« previous next »
Pages: [1]   Go Down

Author Topic: Idled Air Control Housing Gasket #?  (Read 615 times)

0 Members and 1 Guest are viewing this topic.

Offline AWK

  • 4BangerJP.comŪ Donator
  • Member
  • *
  • Posts: 45
Idled Air Control Housing Gasket #?
« on: March 30, 2015, 07:00:55 AM »
Anyone know the part number for the gasket between the IAC housing and the Throttle body?   My local parts store doesn't have it and only has the base (Manifold) gasket.   I am doing the 2.4 to 4.0 conversion.

Thank you,

AWK
Logged

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Idled Air Control Housing Gasket #?
« Reply #1 on: March 30, 2015, 08:38:39 AM »
use very thin film of RTV
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline AWK

  • 4BangerJP.comŪ Donator
  • Member
  • *
  • Posts: 45
Re: Idled Air Control Housing Gasket #?
« Reply #2 on: March 30, 2015, 04:22:58 PM »
Jeep dealer doesn't show or list the part.  Couldn't find it at Napa or o'riellys.  Rtv it is.
Thanks
AWK
Logged

Offline AWK

  • 4BangerJP.comŪ Donator
  • Member
  • *
  • Posts: 45
Re: Idled Air Control Housing Gasket #?
« Reply #3 on: April 02, 2015, 09:41:31 AM »
Worked just fine.  TB is in and TJ is puring like a kitten (with a Check engine Lite)   But I already had that!  I will fix it this weekend with a new converter and a O2 sensor.    :clap:
Logged

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Idled Air Control Housing Gasket #?
« Reply #4 on: April 03, 2015, 01:59:35 AM »
cool  :thumb:
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline AWK

  • 4BangerJP.comŪ Donator
  • Member
  • *
  • Posts: 45
Re: Idled Air Control Housing Gasket #?
« Reply #5 on: April 06, 2015, 12:18:57 PM »
Dropped the transfer skid plate , changed all 6 cinch nuts then dropped it 1 inch.  Got rid of most of the vibration.  While I was there I installed a new cross over pipe with two new O2 sensors.  Chech engine light is gone.  Someone before me had gutted the converter.   New converter makes the exhaust sound much better.   

AWK
Logged
Pages: [1]   Go Up
« previous next »