« previous next »
Pages: [1]   Go Down

Author Topic: Throw-out bearing retainer clip...  (Read 611 times)

0 Members and 1 Guest are viewing this topic.

Clem

  • Guest
Throw-out bearing retainer clip...
« on: April 08, 2008, 09:50:43 PM »
Does anyone have a good exploded diagram of the exact location of the throwout bearing retainer clip? It has been a LONG time since I messed with pulling this monster apart... Thanks.
Logged

Clem

  • Guest
Re: Throw-out bearing return spring...
« Reply #1 on: April 09, 2008, 08:09:21 AM »


I am trying to get part #12 figured out...    :brick:

« Last Edit: April 09, 2008, 08:20:17 AM by Clem »
Logged

gkainz

  • Guest
Re: Throw-out bearing retainer clip...
« Reply #2 on: May 30, 2008, 10:22:09 PM »
I just put part #12 back on yesterday - could NOT reach around the arm (#3) to get the spring to latch over the stud (#5) so I removed the nut from the back of #5, installed the retainer spring and arm to the stud and then slid the whole thing into the bellhousing and tightened the nut on the back of the stud.
Logged
Pages: [1]   Go Up
« previous next »