Author Topic: 1991 2.5L and the Magnaflow Part# 23229  (Read 921 times)

0 Members and 1 Guest are viewing this topic.

ddrongowski

  • Guest
1991 2.5L and the Magnaflow Part# 23229
« on: February 02, 2010, 09:45:01 AM »
I am going to replace the catalytic converter with the Magnaflow http://www.car-sound.com/02product/displaydirectfit01.asp?catalogid=22892&directfit=23229. Is the air injection tube on the Magnaflow is used or does is get plugged? I have been under the jeep a few times but have not noticed a tube on the stock catalytic converter. Yes I am also going to install the Magnaflow SS cat back exhaust also.

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: 1991 2.5L and the Magnaflow Part# 23229
« Reply #1 on: February 02, 2010, 11:45:16 AM »
Normally they come plugged.  Not sure about that one in particular.

EDIT:
 Car Sound installs a factory capped, 90 degree air tube on “with air” converters. This saves time during installation. There is no need for additional labor to weld on an air tube or to create a bend when only an air tube stub is provided.


So it's capped from the factory
« Last Edit: February 02, 2010, 11:47:00 AM by oldjeep »
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: 1991 2.5L and the Magnaflow Part# 23229
« Reply #2 on: February 02, 2010, 11:51:32 AM »
yeah, mine has a tube that was capped just like oldjeep said. Not sure why but the one without a tube was more expensive (both were generic ones), so i went for the one with the tube.
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

ddrongowski

  • Guest
Re: 1991 2.5L and the Magnaflow Part# 23229
« Reply #3 on: February 02, 2010, 12:31:38 PM »
Thanks for the help.