« previous next »
Pages: [1]   Go Down

Author Topic: Hole in starter?  (Read 1885 times)

0 Members and 1 Guest are viewing this topic.

Offline neale_rs

  • Member
  • Posts: 3583
Hole in starter?
« on: September 08, 2013, 03:53:01 PM »
Are these holes at the bottom front of the starter and near the midpoint supposed to be open or should they be plugged with something?

Thanks

Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline grumpygy

  • Member
  • Posts: 882
Re: Hole in starter?
« Reply #1 on: September 08, 2013, 04:07:55 PM »
Mine looks liken this.

Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline neale_rs

  • Member
  • Posts: 3583
Re: Hole in starter?
« Reply #2 on: September 08, 2013, 04:23:48 PM »
That looks pretty different.  My YJ is a pretty late production '95.  It might be a TJ starter in mine, not sure.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline neale_rs

  • Member
  • Posts: 3583
Re: Hole in starter?
« Reply #3 on: September 10, 2013, 07:05:04 AM »
Nobody else has a starter like mine?
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Hole in starter?
« Reply #4 on: September 10, 2013, 06:02:37 PM »
Quote from: neale_rs on September 10, 2013, 07:05:04 AM
Nobody else has a starter like mine?

I looked at mine. Looks to be the same as yours near as I can tell. It's filthy and the skid plate makes it hard to see.
But the hole at the front on mine has a soft rubber tube coming out of it. No idea what it's for. Maybe a inch long.
I can't see the 2nd hole due to the angle and the skid being in the way. Not to mention a thick layer of greasy dirt.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline neale_rs

  • Member
  • Posts: 3583
Re: Hole in starter?
« Reply #5 on: September 10, 2013, 07:05:45 PM »
Thanks.  I'm going to at least partially cover the front hole and seal the other hole.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Hole in starter?
« Reply #6 on: September 10, 2013, 10:32:46 PM »
Quote from: neale_rs on September 10, 2013, 07:05:45 PM
Thanks.  I'm going to at least partially cover the front hole and seal the other hole.

Not sure I would worry about it. Looks like the holes are suppose to be there. Not sure why the rubber hose thing is on the front hole. It's open on the bottom side.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline neale_rs

  • Member
  • Posts: 3583
Re: Hole in starter?
« Reply #7 on: September 11, 2013, 05:32:14 AM »
My guess is that the hose is so that it can drain out but at the same time make it so it is harder for mud or dirt to enter.    Mine has not had a hose for the past 6 years, so like you said it is probably not worth worrying about.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: Hole in starter?
« Reply #8 on: September 29, 2013, 09:36:20 AM »
Quote from: neale_rs on September 10, 2013, 07:05:04 AM
Nobody else has a starter like mine?
mine is the same as yours, that hole has a rubber tube on it to drain condensation and not let the dirt get in.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline neale_rs

  • Member
  • Posts: 3583
Re: Hole in starter?
« Reply #9 on: September 29, 2013, 06:36:29 PM »
Thanks.  Still haven't gotten around to doing anything with respect to this.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline Tr00b

  • Member
  • Posts: 212
Re: Hole in starter?
« Reply #10 on: September 29, 2013, 08:45:23 PM »
On air filters its a pinch valve for unloading dust and junk...
Logged

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Hole in starter?
« Reply #11 on: October 01, 2013, 07:17:20 AM »
The round hole in the end usually has a short rubber drain hose in it.  Not sure about the other one.
Logged

Offline neale_rs

  • Member
  • Posts: 3583
Re: Hole in starter?
« Reply #12 on: October 01, 2013, 07:19:19 AM »
Thanks.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch
Pages: [1]   Go Up
« previous next »