Author Topic: 2.5 turbo question  (Read 5711 times)

0 Members and 4 Guests are viewing this topic.

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: 2.5 turbo question
« Reply #30 on: December 11, 2009, 10:40:42 PM »
[...] the factory pump is only good for 7psi [...]

i require translation on this one
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline chardrc

  • Member
  • Posts: 3535
Re: 2.5 turbo question
« Reply #31 on: December 12, 2009, 07:56:53 AM »
how is the project going ? did you fix the Jeep
you need split second FTC1-019B and a fuel pump booster. the factory pump is only good for 7psi and you're 44lbs injector is not a problem.

what? even the tbi pump is good for 14psi and tbi runs way lower pressure than mpfi... unless you looking at huge volume rates
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

bluepwr

  • Guest
Re: 2.5 turbo question
« Reply #32 on: December 12, 2009, 08:24:38 AM »
after 7 PSI of boost the factory pump has a hard time keeping up and the wide band starts going lean

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: 2.5 turbo question
« Reply #33 on: December 12, 2009, 08:31:42 AM »
after 7 PSI of boost the factory pump has a hard time keeping up and the wide band starts going lean
ok, so you're talking about boost - it should be fine but a larger pump or a pump booster won't hurt for sure
the guy that started the thread has not been around for some time (on the site). He sent me a pm and he said he got an AEM piggyback for OBDII and that his injectors were putting out too much fuel (probably not at full boost which i thought he was ok for the 15psi), he was also running alcohol injection.
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

alexr40

  • Guest
Re: 2.5 turbo question
« Reply #34 on: January 11, 2012, 10:32:56 AM »
after 7 PSI of boost the factory pump has a hard time keeping up and the wide band starts going lean

not true.. I run super rich at 10.9-11.3 under boost and  12.3-13.0 cruising with stock fuel pump and 850cc injectors (huge). 40% duty cycle on injectors at 7psi full boost.