« previous next »
Pages: [1] 2   Go Down

Author Topic: Syncromesh vs. Mt-90 for AX5  (Read 2874 times)

0 Members and 4 Guests are viewing this topic.

RT

  • Guest
Syncromesh vs. Mt-90 for AX5
« on: September 07, 2010, 05:29:45 PM »
Which one of these gear oils protects your tranny better?
Logged

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: Syncromesh vs. Mt-90 for AX5
« Reply #1 on: September 07, 2010, 06:37:46 PM »
Quote from: RT on September 07, 2010, 05:29:45 PM
Which one of these gear oils protects your tranny better?

I have not run Synchromesh, but MT90 is great; it made my tranny smoother.
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Syncromesh vs. Mt-90 for AX5
« Reply #2 on: September 07, 2010, 07:38:24 PM »
Quote from: jfrabat on September 07, 2010, 06:37:46 PM
I have not run Synchromesh, but MT90 is great; it made my tranny smoother.

Me too.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Syncromesh vs. Mt-90 for AX5
« Reply #3 on: September 07, 2010, 09:03:11 PM »
Is synchromesh a synthetic like the MT90?
Logged

Offline chrisfranklin

  • 4BangerJP.com® Donator
  • Member
  • *
  • Posts: 1276
Re: Syncromesh vs. Mt-90 for AX5
« Reply #4 on: September 07, 2010, 09:08:11 PM »
Mt-90 is what I'm using and it's good. 
Logged
'94 YJ S 5spd, Borla Exhaust, CarSound Cat., PS Ceramic-coated Headers, Airraid intake, 62mm TB, Intake Manifold bored/ceramic-coated, 19lb injectors, Sharp's Adj. FPR, MeanGreen Starter, D30 Aussie locker, 31" Destination MTs, Warn XD9000, Cibie headlights, armor

Offline dwtaylorpdx

  • Member
  • Posts: 1038
Re: Syncromesh vs. Mt-90 for AX5
« Reply #5 on: September 07, 2010, 09:30:08 PM »
Guess I'm the odd man out, but my tranny was rebuilt to use lighter weight lube,
the stock bearings are shrouded and if the lube is too thick it wont get in the
bearings like its supposed to. (Yet another Mopar spec against what Aisin recomended....)

I've been running 20W50 Synthetic oil. Or The actual AX5 lube from the dealer.

The real test would be a temperature probe and some freeway miles... HMM>

Dave
Logged
94 YJ - 2.5 Hesco Cam B&B Ported - AX5 Trans w/Centerforce Dual Friction Clutch - 4" Rough Country Lift W/Skyjacker Shocks - D44 Rear/ARB - D30/ARB - ARB Compressor - Warn M8000 in Custom Bumper - Reunell Rear Bumper - Metalcloak 6" Body Armor Kit - Tuffy Console - 265x85-16 Tires - 2M Radio

Offline neale_rs

  • Member
  • Posts: 3583
Re: Syncromesh vs. Mt-90 for AX5
« Reply #6 on: September 08, 2010, 07:35:26 AM »
I've been using Pennzoil Synchromesh for about 4 years now  (only about 5000 miles) and it has worked well.  I don't think it is synthetic and it was available locally.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

RT

  • Guest
Re: Syncromesh vs. Mt-90 for AX5
« Reply #7 on: September 08, 2010, 10:20:31 AM »
kk I just ordered some, shits expensive!! :fitz: but less expensive than a tranny i guess.
Logged

Offline aka-justin

  • Member
  • Posts: 883
Re: Syncromesh vs. Mt-90 for AX5
« Reply #8 on: September 08, 2010, 11:48:19 PM »
I'm running mobil's synthetic gear oil in my AX-5, Mobil 1 Synthetic Gear Lube
LS 75W-90, seems ok, but not real happy with my shifting.  Seems to have gotten tougher.  First chance I'm switching to some standard gear oil or MT-90.
« Last Edit: September 08, 2010, 11:55:37 PM by 1995yj »
Logged
[1995 YJ 2.5L with 4" lift on 31" KM2 - Sold] 1995yj
[2003 TJ Rubicon 4.0L with 4" lift on 35" Wrangler M/T - Sold]
To be continued...
--Justin

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Syncromesh vs. Mt-90 for AX5
« Reply #9 on: September 09, 2010, 06:30:03 AM »
Quote from: 1995yj on September 08, 2010, 11:48:19 PM
I'm running mobil's synthetic gear oil in my AX-5, Mobil 1 Synthetic Gear Lube
LS 75W-90, seems ok, but not real happy with my shifting.  Seems to have gotten tougher.  First chance I'm switching to some standard gear oil or MT-90.
Mobil is likely GL5 and will ruin your synchros, causing notchy shifting before it gets real bad.  Change it to synchromesh or MT90 soon.  MT90 is best, being a full synthetic it can really improve the shifting, especially when cold.
Logged

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: Syncromesh vs. Mt-90 for AX5
« Reply #10 on: September 09, 2010, 08:53:59 AM »
Quote from: Bounty Hunter on September 09, 2010, 06:30:03 AM
MT90 is best, being a full synthetic it can really improve the shifting, especially when cold.

I'll second this; I had strong doubts when I bought it (was thinking along the lines of "snake oil"), but mine shifts real nice now.
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Syncromesh vs. Mt-90 for AX5
« Reply #11 on: September 09, 2010, 09:28:02 AM »
Quote from: 1995yj on September 08, 2010, 11:48:19 PM
I'm running mobil's synthetic gear oil in my AX-5, Mobil 1 Synthetic Gear Lube
LS 75W-90, seems ok, but not real happy with my shifting.  Seems to have gotten tougher.  First chance I'm switching to some standard gear oil or MT-90.

I ran M1 for about 10K miles. I changed it out and was very surprised to see how much shiney yellow syncro material came out with it. M1 is a GL5 lube. That's bad MMkay. Standard gear oil is GL5, that's bad MMkay. Syncromesh or Redline MT90 or one of the other oils listed in the FAQ page is what you need. (GL3) rated.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

RT

  • Guest
Re: Syncromesh vs. Mt-90 for AX5
« Reply #12 on: September 09, 2010, 06:20:37 PM »
Sweet, whatever works man, will I feel any difference in acceleration or overall peppyness. :weee:..seeing as how I'm lessing the friction lag on my engine
Logged

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Syncromesh vs. Mt-90 for AX5
« Reply #13 on: September 09, 2010, 06:40:23 PM »
Quote from: RT on September 09, 2010, 06:20:37 PM
Sweet, whatever works man, will I feel any difference in acceleration or overall peppyness. :weee:..seeing as how I'm lessing the friction lag on my engine

I didn't. But now I need only a few hours of sleep each night and my vision is much better  :wall:  :eek:
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

RT

  • Guest
Re: Syncromesh vs. Mt-90 for AX5
« Reply #14 on: September 09, 2010, 07:32:07 PM »
Quote from: FourbangerYJ on September 09, 2010, 06:40:23 PM
I didn't. But now I need only a few hours of sleep each night and my vision is much better  :wall:  :eek:
:bandit:
Logged
Pages: [1] 2   Go Up
« previous next »