Author Topic: Regearing!!!  (Read 1762 times)

0 Members and 2 Guests are viewing this topic.

sailorjerry13

  • Guest
Regearing!!!
« on: February 22, 2011, 09:40:59 PM »
Hi everyone, i have a '95 yj w/ 2.5 and just threw some 31's on it, today i went to my local shop and they said they recommend 4.56 ratio, is this to low? Is this to high? What do you guys think?

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Regearing!!!
« Reply #1 on: February 22, 2011, 09:48:49 PM »
Hi everyone, i have a '95 yj w/ 2.5 and just threw some 31's on it, today i went to my local shop and they said they recommend 4.56 ratio, is this to low? Is this to high? What do you guys think?

4.56 brings it back to "like" stock rpm to speed ratio, most people here would tell you to go 4.88 so i wouldn't say it's too low at all.
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Torch_Ind

  • Guest
Re: Regearing!!!
« Reply #2 on: February 23, 2011, 05:54:58 AM »
4.56 brings it back to "like" stock rpm to speed ratio, most people here would tell you to go 4.88 so i wouldn't say it's too low at all.

+1 on 4.88's

DodgeMudder

  • Guest
Re: Regearing!!!
« Reply #3 on: February 23, 2011, 09:48:15 AM »
I wouldn't change gears for 31's not enough difference from stock to justify the cost, if you need to change gears then go 4.88s you will notice a bigger difference and be set to go up to 33's

Torch_Ind

  • Guest
Re: Regearing!!!
« Reply #4 on: February 23, 2011, 10:34:04 AM »
I wouldn't change gears for 31's not enough difference from stock to justify the cost, if you need to change gears then go 4.88s you will notice a bigger difference and be set to go up to 33's

 :thumb:

4BangerTJ

  • Guest
Re: Regearing!!!
« Reply #5 on: February 23, 2011, 12:12:37 PM »
I personally wouldn't change gears for 31s. I currently have 31s on mine after coming with 205s stocks and its fine. Still does 70 fine still plenty peppy. I will be going to 4.88s when I put on 35s next month but that's a must have with that big of tire but IMO a waste of time and money for 31s.

Torch_Ind

  • Guest
Re: Regearing!!!
« Reply #6 on: February 23, 2011, 12:28:58 PM »
I personally wouldn't change gears for 31s. I currently have 31s on mine after coming with 205s stocks and its fine. Still does 70 fine still plenty peppy. I will be going to 4.88s when I put on 35s next month but that's a must have with that big of tire but IMO a waste of time and money for 31s.

I got 4.88's for my 33's and love it.. would even go bigger if my diff's would have allowed it.  building jeeps is very addictive so if you already got 31's on it you probably will end up going bigger tires later.. the only thing 4.88's will hurt you is in mpg's you will love it with your 31's for power and accelerate.. I had put 215's "28's" on mine while I was doing some body work and it was a hot rod it was so quick and wasn't that bad on the highway..

it's never a waste to re-gear to 4.88's not in a underpowered jeep. if you were rocking a 6cld or v8 I would change my opinion a bit if you were doing highway a lot..

sailorjerry13

  • Guest
Re: Regearing!!!
« Reply #7 on: February 23, 2011, 08:15:43 PM »
Thanks for the answers guys, the gentleman at the shop said that with the 4.56 i could still go to 32's or 33's

Torch_Ind

  • Guest
Re: Regearing!!!
« Reply #8 on: February 23, 2011, 08:21:35 PM »
Thanks for the answers guys, the gentleman at the shop said that with the 4.56 i could still go to 32's or 33's

I would go 4.88's trust us

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Regearing!!!
« Reply #9 on: February 23, 2011, 08:22:47 PM »
Your stock gears are either 4.10 (manual) or 3.73 (auto), so switching to 4.56 isn't much of a change, not worth the expense and trouble.  Go 4.88 and don't look back, especially if you think you will ever go larger (we all do LOL).

sailorjerry13

  • Guest
Re: Regearing!!!
« Reply #10 on: February 23, 2011, 08:24:18 PM »
Would the 4.88 still work well even if i decide to keep the 31's?

sailorjerry13

  • Guest
Re: Regearing!!!
« Reply #11 on: February 23, 2011, 08:36:49 PM »
My yj is stick by the way, the thing is that i feel like the engine is bogging, i cant use the 5th gear or go over 60mph, gas milage is poor and it feels heavy as hell

Torch_Ind

  • Guest
Re: Regearing!!!
« Reply #12 on: February 23, 2011, 08:47:44 PM »
Would the 4.88 still work well even if i decide to keep the 31's?

yes even with 31's you will end up bigger I'm sure of it anyway but they will still work good with 31's

sailorjerry13

  • Guest
Re: Regearing!!!
« Reply #13 on: February 23, 2011, 08:59:52 PM »
Awsome, i'll take your word for it since u have the experience, thank you guys so much for the info

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Regearing!!!
« Reply #14 on: February 24, 2011, 06:30:06 AM »
31" and 4.88 will be just fine.