Changing the Serpentine Belt on an 01 TJ

May 23, 2012, 05:32:08 AM

Welcome, Guest. Please login or register.

News: Did You read the FAQ? ...most likely not... ...why not try it?

Home

Help

4bangerJP.com > General Forums > The Work Bench > Topic: Changing the Serpentine Belt on an 01 TJ

Pages: [1] Go Down

« previous next »

	Author	Topic: Changing the Serpentine Belt on an 01 TJ (Read 345 times)
0 Members and 2 Guests are viewing this topic.

01amberfirewv

Guest

Changing the Serpentine Belt on an 01 TJ

« on: June 26, 2008, 06:33:05 AM »

I need to change the Serpentine Belt on my TJ (at least 60,000 on the current one) and the idler pully doesnt seem to move. Is it spring loaded or do I just losen the bolt and move the pulley?


	Logged

Mozman68

Poseur Extraordinaire®
Member

Karma: +5/-0
Offline

Offline

Posts: 2442

Re: Changing the Serpentine Belt on an 01 TJ

« Reply #1 on: June 26, 2008, 08:39:21 PM »

You should be able to just loosen the bolt enough to pull the belt off.....


	Logged

2000 TJ...4" Full Traction long arm, ORO swayloc, HP D60's front and rear, 35x12.5 Trxus MT's on 17x9 AR Teflon Chambers, Hunsaker front seats, ARB lockers front and rear, JCR off road flat fenders, sliders, rear fenders installed over PSC crusher corners

jagular7

Member

Karma: +3/-0
Offline

Offline

Posts: 900

Re: Changing the Serpentine Belt on an 01 TJ

« Reply #2 on: July 02, 2008, 06:12:53 AM »

Not sure when Jeep changed, (thinking 04 or so), but check behind and underneath the ps pump. The bracket holding the pump will have a bolt underneath it that is in a channel and a long adjustable bolt on the back. You loosen both and work the adjustable to pull/draw the pump to tighten/loosen the belt.


	Logged

Jagular7
97 SE - Rubbered and locked for fun

Pages: [1] Go Up

4bangerJP.com > General Forums > The Work Bench > Topic: Changing the Serpentine Belt on an 01 TJ

« previous next »