« previous next »
Pages: 1 2 [3]   Go Down

Author Topic: Bought a used Warn XD9000i winch today  (Read 11434 times)

0 Members and 1 Guest are viewing this topic.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Bought a used Warn XD9000i winch today
« Reply #30 on: May 23, 2012, 12:28:35 PM »
We've discussed this before recently.  The reasoning is that you can see when a Grade 5 is being stretched past it's limits.  A Grade 8 will sheer with no advance warning.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline chrisfranklin

  • 4BangerJP.comŽ Donator
  • Member
  • *
  • Posts: 1276
Re: Bought a used Warn XD9000i winch today
« Reply #31 on: May 23, 2012, 12:36:47 PM »
Quote from: Jeffy on May 23, 2012, 12:28:35 PM
We've discussed this before recently.  The reasoning is that you can see when a Grade 5 is being stretched past it's limits.  A Grade 8 will sheer with no advance warning.

Interesting.   Will look at the previous discussion, also
Logged
'94 YJ S 5spd, Borla Exhaust, CarSound Cat., PS Ceramic-coated Headers, Airraid intake, 62mm TB, Intake Manifold bored/ceramic-coated, 19lb injectors, Sharp's Adj. FPR, MeanGreen Starter, D30 Aussie locker, 31" Destination MTs, Warn XD9000, Cibie headlights, armor

Offline chardrc

  • Member
  • Posts: 3535
Re: Bought a used Warn XD9000i winch today
« Reply #32 on: May 23, 2012, 03:38:35 PM »
its because the grade 5 bolts will bend a bit before shearing off. where grade 8 are more "brittle" and will shear without bending much.
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr
Pages: 1 2 [3]   Go Up
« previous next »