« previous next »
Pages: [1]   Go Down

Author Topic: Power steering pump?  (Read 1442 times)

0 Members and 3 Guests are viewing this topic.

95yjman

  • Guest
Power steering pump?
« on: December 02, 2012, 08:42:49 PM »
When I first start up my TJ I have a chirp coming from one of the pulleys..I think its coming from my power steering pump.  However it seems once everything gets good and warm in the engine bay it goes away and no longer chirps.  Do you guys think my power steering pump is on its way out?  or do I just need to tighten my belt up? Seems to still steer and turn fine as of now..
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Power steering pump?
« Reply #1 on: December 03, 2012, 11:40:01 AM »
Tighten your serpentine belt.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Power steering pump?
« Reply #2 on: December 03, 2012, 03:56:35 PM »
that (what he ^ said) and might want to consider also replacing it (if it's been doing it for a while and you see rubber filings around the pulleys it's probably a good idea to install a new one).
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

95yjman

  • Guest
Re: Power steering pump?
« Reply #3 on: December 03, 2012, 10:54:26 PM »
I did replace it, however I was worried about getting it too tight.  thanks guys! I will get her a little more snug
Logged

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Power steering pump?
« Reply #4 on: December 04, 2012, 10:06:11 AM »
Quote from: 95yjman on December 03, 2012, 10:54:26 PM
I did replace it, however I was worried about getting it too tight.  thanks guys! I will get her a little more snug
same happened to me, got it tight but i think they need retightening after a bit, seems to be as i had it fairly tight as well and start squeeling after 3 or 4 days in the morning, readjusted and didn't do it after that.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline jagular7

  • Member
  • Posts: 987
Re: Power steering pump?
« Reply #5 on: December 06, 2012, 08:58:51 AM »
To figure out the tension on your serpentine, you find the longest spread on the belt that is free. Push/pull on it. It shouldn't deflect no more than 1/4 inch.

When you replaced the belt, did you check the play on the idler pully(s)? Did you the serpentine correctly? Smooth side run against the smooth pulleys and the teeth side run against the grooved pullys.
My YJ had the teeth side running against the smooth idler. Squeaked every start up. I fixed it....
Logged
Jagular7
97 SE - Rubbered and locked for fun
94 SE - stock, collecting parts for 37s
Pages: [1]   Go Up
« previous next »