« previous next »
Pages: [1]   Go Down

Author Topic: 1-piece TJ front end  (Read 990 times)

0 Members and 2 Guests are viewing this topic.

Offline Hunter02

  • Member
  • Posts: 64
1-piece TJ front end
« on: August 13, 2013, 12:01:03 PM »
Is there a chance that anyone knows where to pick up a one-piece front end for a TJ? Just found an '01 that has damage to EVERY piece of sheet metal forward of the cowl. I've looked and looked and found zip.
Thanks Hunter
Logged

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: 1-piece TJ front end
« Reply #1 on: August 13, 2013, 01:10:11 PM »
make sure the frame is not bent, if it is might as well pass on it.
also, make sure it's not a write-off/wrecked from insurance, you could have trouble registering it if that's the case as it would be for parts only and the VIN be marked as to not be eligible for registration or non-insurable.

a salvage yard would be your best bet for parts
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: 1-piece TJ front end
« Reply #2 on: August 13, 2013, 03:54:25 PM »
A fiberglass front end?  Haven't seen one of those in a long time and never for a TJ.  You'd be be be better getting a front clip off a junk yard jeep.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline neale_rs

  • Member
  • Posts: 3583
Re: 1-piece TJ front end
« Reply #3 on: August 13, 2013, 05:10:31 PM »
Campbell makes a hood with some integrated fenders, but with no inner fenders.  http://www.campbellent.com/testimonials.html
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: 1-piece TJ front end
« Reply #4 on: August 13, 2013, 05:51:15 PM »
Quote from: neale_rs on August 13, 2013, 05:10:31 PM
Campbell makes a hood with some integrated fenders, but with no inner fenders.  http://www.campbellent.com/testimonials.html
Those are high-hoods though.  They're not really good if you plan on driving on the highway though.  They vibrate a bit.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."
Pages: [1]   Go Up
« previous next »