Author Topic: '93 yj vibration at 40 mph  (Read 3300 times)

0 Members and 1 Guest are viewing this topic.

Offline dwtaylorpdx

  • Member
  • Posts: 1038
Re: '93 yj vibration at 40 mph
« Reply #15 on: August 24, 2013, 11:38:16 PM »
Oh yea,, totally agree, I was just trying to make them tie together.. LOL

If you can make sure one is to spec then check the other you can tell if the axle tubes and knuckles are in their original position or if the axle is modded..

I've had 1 side twist before.. weld broke.

Thought of another possibility.. My YJ used to have a low frequency vibe in the front that went away when I converted to Hubs and got a 1 piece axle on the right side and got rid of the disconnect. Any time I have the hubs in there is a "rumble" under the front..

Dave

94 YJ - 2.5 Hesco Cam B&B Ported - AX5 Trans w/Centerforce Dual Friction Clutch - 4" Rough Country Lift W/Skyjacker Shocks - D44 Rear/ARB - D30/ARB - ARB Compressor - Warn M8000 in Custom Bumper - Reunell Rear Bumper - Metalcloak 6" Body Armor Kit - Tuffy Console - 265x85-16 Tires - 2M Radio

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: '93 yj vibration at 40 mph
« Reply #16 on: August 25, 2013, 12:06:04 AM »
OK, but...

Quote
I had the front driveshaft done not to long ago and it was balanced, the yoke has some play but nothing crazy. I removed it and drove and still doing it.
« Last Edit: August 25, 2013, 12:06:16 AM by Jeffy »
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."