« previous next »
Pages: [1]   Go Down

Author Topic: Another throttle body question  (Read 1486 times)

0 Members and 1 Guest are viewing this topic.

zeitlerusmc

  • Guest
Another throttle body question
« on: July 25, 2006, 08:50:02 AM »
What year 4.0 throttle body will work on a 2.4l if any, and since the motors are almost the same in the neons and pt cruisers will a throttle body spacer work on my 2.4l if its really for one of the previous mentioned cars?
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Another throttle body question
« Reply #1 on: July 25, 2006, 12:30:43 PM »
From my findings the 2.4L MIGHT be using the same bolt pattern as the 2.5L/4.0L.  Their gaskets are the same parts number.  Take a picture and post it.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

zeitlerusmc

  • Guest
Another throttle body question
« Reply #2 on: July 25, 2006, 12:41:55 PM »
thats what i thought too jeffy but every other after market part seems to be not compatable with the 2.4l
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Another throttle body question
« Reply #3 on: July 25, 2006, 01:02:09 PM »
Quote from: "zeitlerusmc"
thats what i thought too jeffy but every other after market part seems to be not compatable with the 2.4l


Take a picture of it and post it then.  Like I said the gasket seems to be the same.  This would mean that if there's enough room, it should fit.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."
Pages: [1]   Go Up
« previous next »