« previous next »
Pages: [1]   Go Down

Author Topic: Corner Guards  (Read 1356 times)

0 Members and 1 Guest are viewing this topic.

Danny

  • Guest
Corner Guards
« on: July 29, 2006, 06:06:28 PM »
I am looking to install some corner guards but after alot of effort I am not sure how to put them on...They came with the Jeep when I bought it but I just haven't gotten around to putting them on.  My main problem is with the rear lights...does anyone have insight for me?
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Corner Guards
« Reply #1 on: July 29, 2006, 06:22:59 PM »
Quote from: "Danny"
I am looking to install some corner guards but after alot of effort I am not sure how to put them on...They came with the Jeep when I bought it but I just haven't gotten around to putting them on.  My main problem is with the rear lights...does anyone have insight for me?


Who made them?  Most if not all require you to take teh rear light off then bolt it back on.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Danny

  • Guest
Corner Guards
« Reply #2 on: July 29, 2006, 09:58:04 PM »
I don't know who made them...but do you know how to remove the rear light, the rest seems pretty simple...if you want I can take a picture of them, but not sure how that might help, lol.
Logged

Yellowcritter

  • Guest
Corner Guards
« Reply #3 on: July 30, 2006, 01:07:47 AM »
Quote from: "Danny"
but do you know how to remove the rear light, the rest seems pretty simple


Take the 4 screws out that hold the lense cover on, then you'll find 3 bolts inside the housing that attaches it to the body ... take those out and then just unplug the wiring harness. When you get ready to put the housing back on you'll probably need longer bolts depending on the thickness of your corners
Logged

Danny

  • Guest
Corner Guards
« Reply #4 on: July 30, 2006, 08:30:20 AM »
Thanks for your help! I will put them on this afternoon
Logged

Danny

  • Guest
Corner Guards
« Reply #5 on: July 30, 2006, 10:06:51 PM »
Mmmk, having a little trouble with the wiring harness...but I might be able to get it

PS, I will post pics of my yj when I am done...
Logged

Danny

  • Guest
Corner Guards
« Reply #6 on: July 31, 2006, 02:55:04 PM »
How in the world are you supposed to remove the "wiring harness"?  It doesn't just simply unplug...any help would be greatly appreciated...
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Corner Guards
« Reply #7 on: July 31, 2006, 03:42:48 PM »
They just unplug from the harness.  I forget if there is a clip holding them together.  I think the tab is on one side. (opposide side of picture.)

Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Danny

  • Guest
Corner Guards
« Reply #8 on: July 31, 2006, 10:30:34 PM »
whoa...I must be looking at the wrong part then...is it on the actually tail light, or somewhere else?
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Corner Guards
« Reply #9 on: July 31, 2006, 10:55:30 PM »
The tail lights should have a wire harness coming out of the back like these.



The plug would be attached to the end about 10" from the light.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Danny

  • Guest
Corner Guards
« Reply #10 on: July 31, 2006, 11:03:47 PM »
OOOOOHHHH....thank you so much...man I feel stupid...I was trying to detach directly at the light...no wonder it wasn't working...thank you so much...
Logged
Pages: [1]   Go Up
« previous next »