Author Topic: Poison Spyder rock sliders  (Read 1873 times)

0 Members and 1 Guest are viewing this topic.

dloc26

  • Guest
Poison Spyder rock sliders
« on: September 24, 2006, 11:25:35 AM »
ive had these poison spyder rock sliders sittin on my back porch for a few months now. has anyone installed these? i know there not that hard but its just a huge pain in the ass. How long did it take? any tips or hints before i finally do this install. These are the rock sliders with the rail, and they mount between the body and my body lift mounts. so i know i have to shave those down 3/16 of an inch.

Jesse-James

  • Guest
Poison Spyder rock sliders
« Reply #1 on: September 24, 2006, 11:56:36 AM »
Only advice I can offer is to make sure you use a gasket between them and the body to prevent rust.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Poison Spyder rock sliders
« Reply #2 on: September 24, 2006, 12:54:57 PM »
Why do you have to shave down the body mount?
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Poison Spyder rock sliders
« Reply #3 on: September 24, 2006, 01:19:44 PM »
The sliders have 3/16" plate that slide in above the body mounts.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Poison Spyder rock sliders
« Reply #4 on: September 24, 2006, 01:35:51 PM »
3/16 isn't enough to even worry about.  If you don't cut the bushing peoperly, you can cause it to tear prematurely.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline Mozman68

  • Poseur ExtraordinaireŽ
  • Member
  • *
  • Posts: 2660
Poison Spyder rock sliders
« Reply #5 on: September 24, 2006, 03:13:27 PM »
There was a write up in JP a few months back walking through the install....I'm sure it's on their website.....

Well, this wasn't the one I was thinking of, but here they are installing one on an Unlimited....

http://www.jpmagazine.com/projectbuild/154_0501_awesome_unlimited_part_3/index.html
2009 Audi S5....what....its 4wd...sort of....