« previous next »
Pages: [1]   Go Down

Author Topic: AX-5 Fill hole location  (Read 1342 times)

0 Members and 1 Guest are viewing this topic.

jquest1

  • Guest
AX-5 Fill hole location
« on: February 11, 2007, 08:44:11 AM »
Hello,
New to the forums here - but I've checked the FAQ and found teh FSM. I still am not sure where the Fill-hole is located on my AX-5 Transmission. It needs a fluid change, and I think it's the bolt on the passenger side that is the same size as the drain hole, but I would like to be sure. If anyone could help me out or post a photo, it would be much appreciated. Thanks!

97 4-cyl manual
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: AX-5 Fill hole location
« Reply #1 on: February 11, 2007, 01:12:00 PM »
You looked at the FSM and still can't find it?  Go look on page 21-3 in the FSM.  The fill plug is on the passenger side.  It is not the torx that reads, 'DO NOT REMOVE'.

You can see it below the shifter. Top, forward most bolt next to the black thing.



Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

jquest1

  • Guest
Re: AX-5 Fill hole location
« Reply #2 on: February 11, 2007, 03:09:55 PM »
Quote from: Jeffy on February 11, 2007, 01:12:00 PM
You looked at the FSM and still can't find it?  Go look on page 21-3 in the FSM.  The fill plug is on the passenger side.  It is not the torx that reads, 'DO NOT REMOVE'.

You can see it below the shifter. Top, forward most bolt next to the black thing.





This one?
http://rides.webshots.com/photo/2958078030096631602kwiyGW
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: AX-5 Fill hole location
« Reply #3 on: February 11, 2007, 05:11:32 PM »
Yes, according to the FSM, that's the full plug.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline chardrc

  • Member
  • Posts: 3535
Re: AX-5 Fill hole location
« Reply #4 on: February 11, 2007, 06:16:45 PM »
what happens if you move the torques that says do not remove.
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: AX-5 Fill hole location
« Reply #5 on: February 11, 2007, 06:49:56 PM »
Quote from: chardrc on February 11, 2007, 06:16:45 PM
what happens if you move the torques that says do not remove.

The world stops rotating...   :doggy:  If I remember right, behind a few of them are springs and a check ball.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

jquest1

  • Guest
Re: AX-5 Fill hole location
« Reply #6 on: February 11, 2007, 07:21:47 PM »
THanks for the help. Quikest answer to that question of anywhere I could find.
Logged

Offline chardrc

  • Member
  • Posts: 3535
Re: AX-5 Fill hole location
« Reply #7 on: February 12, 2007, 02:56:54 PM »
Quote from: Jeffy on February 11, 2007, 06:49:56 PM
The world stops rotating...   :doggy: 

 :yikes: :yikes: :yikes:. lol i just had to ask
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Tall Boy

  • Guest
Re: AX-5 Fill hole location
« Reply #8 on: February 15, 2007, 09:37:59 PM »
Funny, My buddy did my  30K on mine some 4 years ago and while it was draining I brought to him a bolt that read do not remove he had pulled out to vent the tranny as it drained. My tranny was in reverse and I guess that is what saved it from being destroyed. He loaded his pants pretty quick.
 The fill hole is in the side of the tranny, on the pasdsenger side -  the exact opposite side of the do not remove bolt. The drain bolt is on the bottom.

i used a fluid pump from kragen to refill it, till the plunger wore out. then I just used the hose from it.
Logged
Pages: [1]   Go Up
« previous next »