« previous next »
Pages: [1]   Go Down

Author Topic: throttle position senser  (Read 591 times)

0 Members and 1 Guest are viewing this topic.

christopher

  • Guest
throttle position senser
« on: April 25, 2007, 04:20:31 PM »
my maintenance lite came on the other day after i kept the throttle to the floor for a long time fighting the wind anyway i check my codes and it threw tps input below minimum acceptable voltage or below minimum acceptable voltage.what does that mean?is it going out or is somthing going wrong with my electrical?any help would be greatly appreciated.
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: throttle position senser
« Reply #1 on: April 25, 2007, 04:29:16 PM »
I would disconnect the battery and see if it comes up again.  Having it come up once could be a fluke.  What it means is that it can't tell there the throttle plate is with relation to how much air is entering the engine.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

yellowta

  • Guest
Re: throttle position senser
« Reply #2 on: April 25, 2007, 05:23:51 PM »
Can also be caused by a vacuum leak at the throttle body  :wave:
Logged

christopher

  • Guest
Re: throttle position senser
« Reply #3 on: April 26, 2007, 07:35:25 AM »
i thought about trying that my check engine lite came on last night for about 5 minutes then went back off.gona on hook the battery today see if that clears all my problems.thanks  jeffy
Logged
Pages: [1]   Go Up
« previous next »