« previous next »
Pages: [1]   Go Down

Author Topic: Rear End Oil Fill  (Read 604 times)

0 Members and 2 Guests are viewing this topic.

Offline 95 Lowbuck

  • Member
  • Posts: 140
Rear End Oil Fill
« on: April 10, 2007, 05:38:40 PM »
Installing a D44 into my YJ.
The Pinion will be rotated up for  the SYE and CV Drive Shaft.
How do  you make sure that you have enough Oil in
the Rear End to lubricate the Pinion Bearing ?
Should I buy an aftermarket Cover with the raised Fill Plug ?
If so, any suggestions ?
Logged
1995 YJ RioGrand, 2.5, AX5, 231 T.C., A.A. SYE,
D30, XJ D44, Truetracs F+R, CV D.S. F+R, 4.88's
R.E. 4" STD., 33-10.50 BFG KO2's on stock rims.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Rear End Oil Fill
« Reply #1 on: April 10, 2007, 06:35:30 PM »
I'd just fill it to the plug.  That's all I do.  If you get a new cover or raise the current plug, you run teh risk of adding too much oil and having it leak out the pinion or outer seals.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

lanulos89

  • Guest
Re: Rear End Oil Fill
« Reply #2 on: April 10, 2007, 07:12:50 PM »
park going downhill, or jack up from the rear bumper frame, anything to make the rear pinion lean toward the ground.  but i agree with jeffy if its up to the fill cap its fine
Logged
Pages: [1]   Go Up
« previous next »