« previous next »
Pages: [1]   Go Down

Author Topic: low ratio carrier  (Read 820 times)

0 Members and 1 Guest are viewing this topic.

huntingbuck101

  • Guest
low ratio carrier
« on: April 15, 2007, 08:49:18 PM »
I have 4:10 gears now in my 98 TJ and looking at going 4:88 will I need to get a low ratio carrier?  what else will I need to swap them out?
Logged

jcsanders79

  • Guest
Re: low ratio carrier
« Reply #1 on: April 15, 2007, 09:41:58 PM »
The carrier will be fine, they are 3.73 and numerically higher so 4:10 to 4:88 will work.  I am assuming that you have a d-35 so you will need a crush sleeve and a new pinion seal.
Logged

Offline chardrc

  • Member
  • Posts: 3535
Re: low ratio carrier
« Reply #2 on: April 16, 2007, 06:04:45 AM »
if i recall correctly 4:88 is the lowest you can go with your stock carrier.. so you'll be ok but with 4:88 but cant go any lower.
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr
Pages: [1]   Go Up
« previous next »