« previous next »
Pages: [1]   Go Down

Author Topic: Performance camshaft install  (Read 1574 times)

0 Members and 1 Guest are viewing this topic.

jeepboy21

  • Guest
Performance camshaft install
« on: January 23, 2006, 03:49:43 PM »
I have had the cam sitting in the garage for about 8 months now and i cant wait, i want it in.  I have a crappy hanyes manual that doesnt help so i am looking for a good writeup.  also any tips, tricks or things i need to watch our for would be greatly appreciated.
Logged

hopp

  • Guest
Performance camshaft install
« Reply #1 on: January 23, 2006, 08:06:23 PM »
Where'd you find the cam? I've been digging around for a 2.5 mopar one for a while now.

Why not look through the fine FSM faq?  :mrgreen:
Logged

jeepboy21

  • Guest
Performance camshaft install
« Reply #2 on: January 23, 2006, 11:27:14 PM »
i got it on ebay for $50 new in box.   and it was pretty close to home had to make and extra 50mile drive from where i went on vacation @ the dunes to get it. not too bad.
Logged

jeepboy21

  • Guest
Performance camshaft install
« Reply #3 on: January 23, 2006, 11:33:18 PM »
Why not look through the fine FSM faq?  :mrgreen:[/quote]

I have a YJ would it still be the same?
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Performance camshaft install
« Reply #4 on: January 23, 2006, 11:40:22 PM »
The process is for the most part,  the same.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

BK2LIFE

  • Guest
Performance camshaft install
« Reply #5 on: April 02, 2006, 05:13:31 PM »
http://www.hescosc.com/shop.asp?action=details&inventoryID=42889&catId=7758

theres a link to hesco..
cam and lifter kits for the 2.5
Logged
Pages: [1]   Go Up
« previous next »