« Reply #4 on: October 02, 2007, 01:16:40 PM »
Its all low pressure so anything will work as long as its a tight fit.
BTW, your tank sure looks differeny than my 97. I only have one pressure line and the EVAP lines. You can 2 pressure lines and a totally different pump cap.
Thanks jag. I actually fixed it yesterday. I picked up a multi size "T" fitting from napa and cut the ends to what I needed. The tank in the photo is from a YJ. It's not my TJ tank. I just used it to show what two lines I needed to connect to one another. My 02 tank looks exactly like your 97 tank.
I didn't know you could mod the 02 tank. I though that could only be done on the initial year TJ's? Next time I drop it I'll have to have a look inside. How much capacity did you gain by trimming the tube?
Logged
02 2.5.L automatic: 4.0L t.b., 4.0l air intake, K&N filter, Scream'n Demon coil, 8.5mm MSD Super Conductor plug wires, Stage 1 Jet Chip, 29" BFG all terrain KO's. Taurus E-fan, Hummer front bumper, Skyjacker high capacity trans pan, 48" hi-lift, Rubi susp w. 3/4" BB.