Author Topic: front 97 tj driveshaft  (Read 744 times)

0 Members and 1 Guest are viewing this topic.

GASHOG

  • Guest
front 97 tj driveshaft
« on: May 24, 2008, 02:09:57 PM »
drive shaft for 97 tj. let me know if anyone has one

rroadkilll

  • Guest
Re: front 97 tj driveshaft
« Reply #1 on: May 24, 2008, 04:44:01 PM »
NO but I voted A!!!

jcsanders79

  • Guest
Re: front 97 tj driveshaft
« Reply #2 on: May 24, 2008, 05:24:09 PM »
There was a guy on ebay that will custom make you one for around $200.  http://search.ebay.com/_W0QQsassZcjtatton  I used him for my rear DC drive shaft and have been pleased and will have him make me a front shaft when I need it too.

Offline jagular7

  • Member
  • Posts: 987
Re: front 97 tj driveshaft
« Reply #3 on: May 27, 2008, 07:04:19 AM »
Check with your local yards for a stock replacement. Search under Car Parts for something like that. However, it will be used and from a damaged vehicle so you never know what shape it will be in.

Check with your local 4wd clubs. They may have some good leads for parts. I'd also check with your local truck supplier. I use Inland Truck Parts and they make ds right at the shop. I also get a discount since the manager is a club member.
Jagular7
97 SE - Rubbered and locked for fun
94 SE - stock, collecting parts for 37s

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: front 97 tj driveshaft
« Reply #4 on: May 27, 2008, 10:24:04 AM »
You'll need to make sure it's for your Jeep as well.  Driveshaft lengths vary between 2.5/2.4/4.0's as well as between Auto's and Manuals...
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."