« previous next »
Pages: [1]   Go Down

Author Topic: Lube ??  (Read 832 times)

0 Members and 5 Guests are viewing this topic.

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Lube ??
« on: November 22, 2008, 07:56:22 PM »
I changed the fluid in my Klune not to long ago. It's 75-90 that's what Klune say's to use. It only holds about half a bottle.I used M1. Anyway when I changed it the fluid was very black and had a strong burnt smell. Not the normal 90wt smell. The Klune is about 2 inches from the Cat. so I know it's getting real hot.
My question is...Does the 90-140 handle the heat better. Do you think it would be safe running a thicker fluid? It doesn't get real cold here in the winter.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Lube ??
« Reply #1 on: November 24, 2008, 02:09:39 PM »
Well I called High Impact. They said not to run the thicker oil. There afraid it won't get to the needle bearings.

I did drive it around with some fresh 75-90 Mobil 1 and it seems to be quieter. I 'll just change the oil more often, it's easy enough to do.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Lube ??
« Reply #2 on: November 24, 2008, 02:45:01 PM »
Quote from: FourbangerYJ on November 24, 2008, 02:09:39 PM
Well I called High Impact. They said not to run the thicker oil. There afraid it won't get to the needle bearings.

I did drive it around with some fresh 75-90 Mobil 1 and it seems to be quieter. I 'll just change the oil more often, it's easy enough to do.

How about running a synthetic?
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Lube ??
« Reply #3 on: November 24, 2008, 02:58:38 PM »
Quote from: Jeffy on November 24, 2008, 02:45:01 PM
How about running a synthetic?

Mobil 1 is a synthetic. I am a huge believer in synthetic's. I have it everywhere possible.

I think the problem was not changing it soon enough. I didn't know that they hold only about a 1/2 quart of oil. I would image that the heat that builds up takes it's toll on that small amount of oil.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline aw12345

  • Member
  • Posts: 3065
    • my jeep picture page
Re: Lube ??
« Reply #4 on: November 24, 2008, 03:05:18 PM »
In a way its somewhat like a terralow those planetaries work hard. So I am sure that in low range it builts uo quite a bit of heat. The catalytic convertor being near it doesn't help but I doubt its the source of your oil breakdown.
I think with frequent oil changes you are on the right track
Logged
2006 Jeep Wrangler TJ SE
2004 Jeep Wrangler TJ SE

jcsanders79

  • Guest
Re: Lube ??
« Reply #5 on: November 24, 2008, 07:17:42 PM »
Only half a quart?  Really?  If thats the case I'd change it monthly.  M1 is great stuff, how long was it?
Logged

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Lube ??
« Reply #6 on: November 24, 2008, 08:36:46 PM »
Quote from: jcsanders79 on November 24, 2008, 07:17:42 PM
Only half a quart?  Really?  If thats the case I'd change it monthly.  M1 is great stuff, how long was it?

Well I should have said half a bottle, I'm not sure what size the bottle is.



I guess I shouldn't be surprised. They are only about 6 inches long and are packed with planetary gears and a shift fork. Not much room for fluids.

Not sure on the length of time I would guess maybe 12K-15K miles.

I run Mobil 1 in just about everything, motor, diffs, Klune, Dana 20 T-case. I did run it in the tranny for awhile. It shifted fine but after a few thousand miles I changed it. It was very glittery from the syncro's being eaten. I switched to Redline MT.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:
Pages: [1]   Go Up
« previous next »