OK I am going to add Electric fan to the yj. what cfm rating is enough?
I found a Flex-a-lite 475 it pulls 2050 cfm, and 10 amps. Is this big enough?
If I were in your position (and I was a year ago), I'd go with the FoMoCo fan; it cost me (including the shroud and conector) a whole $28 and a trip to the junk yard (plus about $20 or $30 more for the relay, switch and wires. I also ended up getting the Delta Current Control fan controller, which was about $120, and controls the fan speed according to the temp of the radiator, so it pulls much less amps than a normal temp setup (I now have it wired with a double position swithc, and I run the high speed wires through the controller for auto, I can switch the whole thing off, and I can override the controller and use the relay to run off the low speed wire so that if the controler ever fails - and it has not - I can still limp out with the fan on). Anyway, just my 2 cents...
Felipe